Boss Hoss Tuning

[bmgjet]

Thanks for the reply. I have already made a cable up using a old network cord and cut one end off it then followed the.

Bench Harness Tutorial.

It detects the ECU as E67 and starts to read but about 40 secs in error pops up. "Received no data".
So im going to go down to the wreackers and cut off a OBD2 plug and make a nice looking adapter then just using a pin headder on the end of a network cord.

[400ss]

Perfect, have fun. let us know if it corrects the problem.

[bmgjet]

Perfect, have fun. let us know if it corrects the problem.

Cable adapter made, Just need to get the owner back with his bike and try it again.