Just out of curiosity...who makes the E80 and what it is it used in? A new DI ECM?
Just out of curiosity...who makes the E80 and what it is it used in? A new DI ECM?
2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison12.9s @ 108 mph
many thanks to Ross and Paul
All files read with EFILive are stored in our own .ctz format for a number of reasons, there is a lot more data saved in to the .ctz file other than the actual contents of the ECM.
Made by Delphi, not presently used in the US though, but yes 'another' DI ECM currently on some 4 cylinder cars. Same story of ECM evolution, more memory, more CPU power. I suspect it is probably the replacement for the E39 series which is now 5 years old, so the time cycle for replacement seems about right.
I no longer monitor the forum, please either post your question or create a support ticket.
You'll find the supported vehicles listed on our flash only supported vehicles page, https://www.efilive.com/flash-only-supported-vehicles.
Fwiw, at this point it's only in a Chinese built Buick at this point.
Cheers
Cindy
I no longer monitor the forum, please either post your question or create a support ticket.
This version of the EFILive Tuning Tool has not yet been
configured to display this controller's operating system.
This may occur if...
your controller has been updated by a GM dealer
to fix a software problem.
OR
you are attempting to load an EFILive custom operating
system without installing the matching *.calz file.
OR
you are attempting to load a non-EFILive custom operating
system.
Please save this calibration's *.ctz file
and email a copy of it to: support@efilive.com
so that we can add support for it.
15878459 OS from an 09 LMM A50 controller says it is not supported in V7.5 build 275 for me. Should this be available?
2005 Twin Turbo Dmax/Allison Ext. Cab Short Box 4X4
Best 1/4 11.8 @ 118+ on #2 only
Twisted Diesel Tuning-The leader in Duramax Tuning Services and soon to offer Common Rail Cummins Tuning!
Bobotune at rocketmail dot com
Bobo, this is listed as a known issue here with the fix.
https://forum.efilive.com/showthread...e-and-firmware
I no longer monitor the forum, please either post your question or create a support ticket.
2005 Twin Turbo Dmax/Allison Ext. Cab Short Box 4X4
Best 1/4 11.8 @ 118+ on #2 only
Twisted Diesel Tuning-The leader in Duramax Tuning Services and soon to offer Common Rail Cummins Tuning!
Bobotune at rocketmail dot com
I no longer monitor the forum, please either post your question or create a support ticket.
2005 Twin Turbo Dmax/Allison Ext. Cab Short Box 4X4
Best 1/4 11.8 @ 118+ on #2 only
Twisted Diesel Tuning-The leader in Duramax Tuning Services and soon to offer Common Rail Cummins Tuning!
Bobotune at rocketmail dot com
No worries, you may not have seen my link before reposting
I no longer monitor the forum, please either post your question or create a support ticket.
[QUOTE=GMPX;215490]All files read with EFILive are stored in our own .ctz format for a number of reasons, there is a lot more data saved in to the .ctz file other than the actual contents of the ECM.
For sure.
Which I would like to ask, is if I could modify a reading of these E80s, like I do in other programs (WinOls for example), in a hexdecimal table or 2D view. If this was possible, we would modify at least 10 vehicles now!
Thank you for your patience, GMPX.