autove help please

[garyk1970]

Thanks for the help guys....
Paul, is this a "quick" fix or do I need to find another way to add a wideband?

I do have a empty egr circuit I could use for input. (Thanks 5.7ute)

[Blacky]

Thanks for the help guys....
Paul, is this a "quick" fix or do I need to find another way to add a wideband?

I do have a empty egr circuit I could use for input. (Thanks 5.7ute)

Hopefully I'll have a fix for it today. Which wide band are you using, ccan you use the serial interface instead of the analog voltage connection?

Regards
Paul

[garyk1970]

I'm using aem wideband and I don't have a serial plug I've been using analog input. I've been using plx pid's and the log shows .5 AFR lean(ie my wideband will show 15.2 and the log shows 15.7)...

[Blacky]

Hopefully I'll have a fix for it today.

Update:
It took most of today to find and fix the external PID issue. It was a larger problem than it first appeared. All changes are done. Testing will happen tomorrow. I expect to post an update with the problem fixed sometime tomorrow, assuming the testing all works out ok.

Regards
Paul

[garyk1970]

Nice!! Great job as always.

[garyk1970]

Any updates?

[Blacky]

Any updates?

Yes, the testing has gone well. I plan to make the update available today.
Regards
Paul

[Blacky]

Any updates?

Update posted here: https://forum.efilive.com/showthread...te-Feb-09-2015

Regards
Paul

[garyk1970]

Thanks again Paul...

[400ss]

im having a problem like this but with the serial wideband lambda.. take the log. save it, close it, when i reopen it does not has the data of the wideband lambda :S, i gonna try the last update