Results 1 to 2 of 2

Thread: Desired shift times...

  1. #1
    Senior Member thunder550's Avatar
    Join Date
    Mar 2006
    Posts
    178

    Default Desired shift times...

    The stock parameters for a 3/4 ton Silverado with the 4L80E tranny are .4 down low and .3 up high (TPS I think....)

    Is it safe to drop these to 0? Shifts feel a little sloppy right now, would like to firm them up but I don't want to break anything. Shift pressures are vacuum modulated so I don't have control over those.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Should be okay, it will just try to shift using the smallest time duration it mechanically shift at.

    It won't firm the shifts up, it will make the shift transition occur quickly
    (although it may feel firmer since reducing the transition time reduces ramp up/down slip).

    Also set these times to zero when shift kit installed.

Similar Threads

  1. 2010 Camaro 6L80 desired shift times
    By 2010 Bumblebee in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 4
    Last Post: May 5th, 2010, 04:26 AM
  2. Tow / haul and shift times
    By BlownSierra in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 3
    Last Post: September 10th, 2009, 01:39 PM
  3. Desired Shift Time
    By A6sportsracer in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 6
    Last Post: June 27th, 2009, 10:45 AM
  4. Shift Times
    By BustedTruck in forum Gen III V8 Specific
    Replies: 13
    Last Post: January 1st, 2008, 11:53 AM
  5. Need help-Can't reduce shift times!
    By Mach2 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 26
    Last Post: June 2nd, 2007, 06:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •