how do i build a histogram in efilive ?

[joecar]

do mean like this ?Attachment 18137

way is it that when i run my log the the name cylair grams gets a line through it ?
what are the # that appear in the left column
Attachment 18138

Attachment 18139
would you have a look at this log file for me and comment on the KR at low throttle openings at low RPM it seems to be getting a small amount from cyl C,E,F,G,H

The map shows CYLAIR with a line thru it, which means the pid CALC.CYLAIR is not selected... (it also needs SAE.MAF to be selected).

I thought your B5101 table showed E38.APCYL_DMA as the link pid, this is what darcy said above... your log contains this pid, so change your map to use this.

[joecar]

HI Darcy
if you set the KR limits from 0.0 to 1.4 you will see it
Attachment 18140

Attachment 18141
im buggered if i can find ( E38 APCYL .DMA in the drop down pid list on any of the column ,or row with names box ticked or unticked i do have it in my V2 though and works in my logs ?

That amount of KR is very low, I'm wondering if you're really getting knock.

+1 what darcy and statesman said above...
checkmark Names (just below the drop down) and Selected (E38.APCYL_DMA is already selected, I see it in your log, and I see it in the drop down), and in the drop down it will be near the top ("air flow grams/cyl" and shows E38.APCYL_DMA) with Selected checkmarked.

[restless@westnet.com.au]

hi Guys
i think i have it NOW hopefully
page shot

now the big question ? what do the # in the map mean

yes im wondering if it is false knock to ?

[joecar]

hi Guys
i think i have it NOW hopefully
page shot

now the big question ? what do the # in the map mean

yes im wondering if it is false knock to ?

You got it

see on the map toolbar the button labelled n is clicked... this shows the hit count in each cell; click the button x-bar (x with bar over it) to see each cell's averaged value (for its values over its hit count).

( the up-arrow and down-arrow buttons show max and min values for each cell )

[restless@westnet.com.au]

HOW do i get this page up