HI
I try to disable in LML 2012 and it's not work.
I need stand alone ECM
Is someone succeed?
Thanks
shay
HI
I try to disable in LML 2012 and it's not work.
I need stand alone ECM
Is someone succeed?
Thanks
shay
Sorry shay, we have no feedback on that working or not.
I no longer monitor the forum, please either post your question or create a support ticket.
Just out of curiosity... how is the starter relay control circuit wired? What vehicle is the engine in?
Ive done two standalone LML harnesses so far, one of them seemed to work fine (I never heard back from the customer so I assume it worked fine), and the other one couldnt get the engine to fire. Spent hours on the phone diagnosing it, and the ECM refused to enable the injectors. Had good cam, crank, rail pressure signal...it just wouldnt fire the injectors.
Im almost wondering if the LML ECM shares some of the E38 VATS gremlins? Where it needs to see a relay coil load on the starter relay control circuit (even though the VATS is already turned off) before it will enable starting???
2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison12.9s @ 108 mph
many thanks to Ross and Paul
I was thinking that myself about the starter relay as that was a 'feature' GM crept in around 2010 and up
I no longer monitor the forum, please either post your question or create a support ticket.
2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison12.9s @ 108 mph
many thanks to Ross and Paul
Im using OS 12644094.
2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison12.9s @ 108 mph
many thanks to Ross and Paul