Results 1 to 9 of 9

Thread: cant pull stock tune off lly

  1. #1
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default cant pull stock tune off lly

    Iam trying to pull stock tune off an lly and cant get it to pull. Ive puled the radio fuse and still nothing are there more fuses I need to pull and try again. the first time it said bootloader rejected no reply and after the radio fuse was pulled is just said boot loader rejected returned to normal operation. what can I do ?

  2. #2
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    790

    Default

    Does it have an aftermarket radio in it? If so, you need to physically unplug the radio adapter/door chime harness. I've tried pulling fuses and what not, but LLY's are picky and only go through for me if I actually unplug the adapter.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

  3. #3
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    Yea it has aftermarket radio In it so I need to pull it out do I need to pull any more fuses

  4. #4
    Lifetime Member comnrailpwr's Avatar
    Join Date
    Jun 2011
    Posts
    426

    Default

    Pull radio, info, radio amp fuses. un click high speed. Sometimes it works. If not then next option is pull radio. If it has aftermarket remote start unhook wires from OBD2 port

  5. #5
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    ok I pulled the gps and Bluetooth and radio out but it still says bootloader rejected

  6. #6
    Senior Member
    Join Date
    Feb 2012
    Posts
    135

    Default

    Make sure the door is closed and the dome light is off. I have had a few LB7's and LLY's give me trouble when the dome light was on.

  7. #7
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    ok well I got it to pull the stock off but now it wont take a full flash it says conditions not correct or request sequence error $22 so what does that mean

  8. #8
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,780

    Default

    You have something on the data bus causing all your issues, is there any way you can start to isolate things?
    Chances are if you can't read the ECM without issues then a reflash will no doubt fail too.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  9. #9
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    ok I just found out it had an remote start on it. so I need to pull the radio out and gps and bluetoohth and the remote start and then go from there. that's all he said the he knew was on it

Similar Threads

  1. 2004.5 LLY Stock Tune File Needed
    By BigTexas68 in forum Duramax LLY
    Replies: 12
    Last Post: May 20th, 2013, 02:23 AM
  2. Replies: 10
    Last Post: July 7th, 2012, 06:52 AM
  3. ANOTHER LLY Problem, (cant pull stock file)
    By TRUBBS in forum Duramax LLY
    Replies: 7
    Last Post: June 3rd, 2012, 01:53 PM
  4. Can't read stock tune out of LLY ECM
    By JoshH in forum Duramax LLY
    Replies: 6
    Last Post: March 13th, 2012, 09:38 AM
  5. cant pull the stock file
    By saltflat in forum Vortec V6/V8 Specific
    Replies: 4
    Last Post: June 2nd, 2009, 01:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •