A40 Full Read option

[Chuck CoW]

Chuck I can say with 110% certainty that no matter what you say it will not change what I am currently working on or what I plan on working on next, but thanks for your requests
Around here when anyone mentions a controller that begins with 'T' we all run and hide.

Looks like some new T-shirts are in order.... and a big "T" on the front and back!

Chuck CoW

[GMPX]

It's ok, we get all our oil rags from a place down the road so no need for those special shirts you want to get printed.

[THEFERMANATOR]

There's more, we just keep our heads low, read, and wait

What he said.

[GMC-2002-Dmax]

We think the issue is with some OS's not enabling all the checksums we validate. Off the top of my head there is six, on the files that are failing it would appear that some are not actually used (therefore they have a zero value), currently V8 doesn't realise this and simply assumes the checksum is not correct. We are going to have to put in place some system to check what checksums are active and what ones are not (assuming this is the problem).
Hopefully the three people that want this appreciate the amount of hours we have to put in to this A40 'full read' option once it is done

We really do appreciate your efforts, especially if those "T" controllers get shelved for the A40..........LOL

[GMC-2002-Dmax]

I got a FULL READ, the OS has invalid checksum but I can open it with the V7.5 tune tool.

Ross ????

It opened in V7.5.

Thanks

[GMPX]

It opened, but did the checksums show ok in V7?

[GMC-2002-Dmax]

One part did and one part did not ??

[GMPX]

Ah of course, V7 doesn't even look at the OS checksums (when that was put in there was no intention of every offering full reads), move on, nothing new to see here

[GMC-2002-Dmax]

So since V8 has a failed check sum then there is still a failure on the full read..........:(

[GMPX]

I give up, please re-read my posts Tony.