Results 1 to 2 of 2

Thread: logging help

  1. #1
    New Member
    Join Date
    Jul 2014
    Posts
    8

    Default logging help

    Ok folks I am in need of some help. This weekend i ended up getting a new laptop mainly for truck logging and such. I have the new updated v7.5 and v8 software updated firmware and boot on my auto cal. i have got the pids pick out for csp5 eda. I have set up my dashboard one with gauges and one with charts. my problem lies in the gauge work great fast response no glitching. Does anyone know why the gauges work but the charts page of the dashboard seems to be doing nothing? i set them both up in the same fashion one at a time picking which on the pids i wanted on which gauge or chart. Any ideals would be greatly appreciated as to where I must be doing something wrong. Thank you.

  2. #2
    New Member
    Join Date
    Jul 2014
    Posts
    8

    Default

    sorry forgot to say i was trying to use v7.5 and no v8 for logging i believe that is what i must use for he 6.7 for logging if not let me know

Similar Threads

  1. A little help on logging
    By davis5597 in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: November 1st, 2012, 10:01 AM
  2. Logging Throttle cracker table and Logging to diagnose a missfire
    By z28ls1818 in forum Gen III V8 Specific
    Replies: 2
    Last Post: August 26th, 2010, 05:01 PM
  3. logging with V2
    By hymey in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: February 5th, 2008, 12:54 PM
  4. Logging
    By petestoy in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: January 25th, 2008, 03:19 PM
  5. I have a few Q's about logging.
    By SmaknSS in forum General
    Replies: 3
    Last Post: December 1st, 2005, 05:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •