Results 1 to 2 of 2

Thread: truck being nightmare

  1. #1
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default truck being nightmare

    ok back on this 05 ive got it to take the dsp tune and run good but now every time it sets for an hour the engine light comes on and is leaving a (p0802 transmission control module tcm mil request) I know that its the trans tripping the light for codes. but my question is if I install a single tune I don't get this. so we installed another dsp we made for another truck which runs great and it pops up with that tune. but one minute you reflash the truck as soon as its done it comes up for tcm,egr,and oil pressure. the other day the oil pressure gauge went to 0 and checked it with the scan tool and it showed no oil pressure deleted the codes and reflashed the same tune back in it and it had oil pressure. so what the heck is going on with this truck iam bout lost

  2. #2
    Senior Member
    Join Date
    Oct 2009
    Posts
    127

    Default

    any one have an idea we are still fighting with this issue

Similar Threads

  1. P0106 nightmare
    By 02CCSB in forum Cummins 6.7L
    Replies: 2
    Last Post: December 3rd, 2012, 05:49 PM
  2. AFR Nightmare
    By RevGTO in forum Gen III V8 Specific
    Replies: 28
    Last Post: November 18th, 2012, 06:21 PM
  3. e38 large cam nightmare.
    By Mike@sic in forum E37, E38 & E67 PFI ECM's
    Replies: 18
    Last Post: November 7th, 2011, 12:55 PM
  4. Upgrading Nightmare. =(
    By Stealth97 in forum FlashScan V2
    Replies: 6
    Last Post: March 3rd, 2009, 07:53 PM
  5. 7.5 Software update nightmare.
    By JOHNBOY in forum Tips and tricks
    Replies: 5
    Last Post: November 23rd, 2007, 09:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •