I have done a lot of reading on dieselplace about electric fans. I would like to try a little bit different set up then what other people are running. I would like to try the 06 5.3L electric fan set up for multiple reasons. 1 its a lot cleaner look then a couple of Taurus fans rigged together, and it bolts into gasser 2500HDs with no issues so I don't see why it wouldn't bolt into my truck. My boss is a very well known tuner for GM cars or trucks in Minnesota except for diesels he hates them haha, anyway he has done that on many many HD gas trucks and they all have bolted in with no issues. The 2nd reason is cause I don't like the way they control fans on and off(pluming in a heat switch in the lower radiator hose area), so my question is to you is is there a way to pin in a couple of wires into an LMM ecm and control them with efilive? Would I have to create new tune files and then reflash my truck with them? Do any of you know if this is possible, or what I am thinking completely wrong? If so what are the pins that I need to run the wires to on the ecm? I know that electric fans are not as good as the mechanical one but Im ok with that. Thanks
Jeff