Results 1 to 7 of 7

Thread: CAX DTC's

  1. #1
    Lifetime Member DURAtotheMAX's Avatar
    Join Date
    Nov 2005
    Posts
    1,016

    Default CAX DTC's

    Is it feasible to write/use a CAX file to add DTC enablers for controllers that EFILive does not have DTC's mapped for?

    Ive found all of the proper addresses for various DTC's in the .bin, I just would like to add them into EFILive so I can turn the DTC's on/off easily in EFILive vs doing it manually in hex.

    Also...."generally speaking" are DTC's kept at the same addresses in a single controller throughout various operating systems? Or does each OS for a specific controller most likely have different addresses for the DTC's depending on OS? Im talking older Delphi-era stuff, not Bosch.

    Thanks
    2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison
    12.9s @ 108 mph

    many thanks to Ross and Paul

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Ben I can't think of an older controller we don't have DTC tables for.
    Nothing is ever in the same spot on different OS's, that would make life too easy. You have to think too that GM add and remove DTC's often, we need to generate a list of support DTC's for every OS.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member DURAtotheMAX's Avatar
    Join Date
    Nov 2005
    Posts
    1,016

    Default

    Quote Originally Posted by GMPX View Post
    Ben I can't think of an older controller we don't have DTC tables for.
    Nothing is ever in the same spot on different OS's, that would make life too easy. You have to think too that GM add and remove DTC's often, we need to generate a list of support DTC's for every OS.
    Allison 5-speed and 6-speed controllers.
    2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison
    12.9s @ 108 mph

    many thanks to Ross and Paul

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Oh ok, I forgot about them. I don't think we ever looked in to those, I'd be surprised if they were the same as the gas/diesel ECM's, I'm pretty sure Allison did their own software.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Junior Member
    Join Date
    Aug 2013
    Posts
    23

    Default

    Are you trying to figure out lock up issues?

  6. #6
    Lifetime Member DURAtotheMAX's Avatar
    Join Date
    Nov 2005
    Posts
    1,016

    Default

    No, I want to do DTC's for the Allison.
    2005 Silverado, CC/SB, 4x4, LT, LILLY/Allison
    12.9s @ 108 mph

    many thanks to Ross and Paul

  7. #7
    Junior Member
    Join Date
    Aug 2013
    Posts
    23

    Default

    Sorry, I was thinking pid's

Similar Threads

  1. Cax Question
    By Chavez91 in forum CAX Files
    Replies: 30
    Last Post: July 13th, 2017, 05:13 AM
  2. loading in the .cax
    By RADustin in forum CAX Files
    Replies: 22
    Last Post: June 13th, 2014, 10:03 AM
  3. DTC's from v2 to lap top and cures to DTC's
    By 68problemchild in forum FlashScan V2
    Replies: 0
    Last Post: October 2nd, 2010, 04:08 AM
  4. E38 and CAX?
    By gmh308 in forum CAX Files
    Replies: 2
    Last Post: April 28th, 2009, 04:54 PM
  5. cax file?
    By myws6formula in forum CAX Files
    Replies: 1
    Last Post: December 21st, 2008, 03:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •