Results 1 to 7 of 7

Thread: April 2015, EFILive Public Release

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default April 2015, EFILive Public Release

    April 13 2015, Public Release

    Release Notes:
    This public release is identical to the April 2015 RC2 software. If you have already downloaded and installed the RC2 software then you do not need to download and install this public release.

    If you have an older version of the software installed and you perform a "Check For Updates", you will see a message indicating that t newer version is available but that no patch exists that can be automatically applied. To obtain the latest public release you must download and install both V7 and V8 from here: http://www.efilive.com/latest/cat/download-efilive

    Please read the warnings and imporatant information in the release notes before installing or running the EFILive software.

    Release Notes.

    Known Issues:
    Check for known issues here.

    Please post new issues, questions or clarifications (large or small) in this thread.
    As new issues are verified they will be posted in the "known issues" thread above.

    Version Numbers:
    After installing the latest release you should have the following software, boot block, firmware versions installed:
    EFILive V7 software: V7.5.7 Build 281
    To view the installed version, select Help->About (in the V7 Scan or Tune software).

    EFILive V8 software: V8.2.2 Build 275
    To view the installed version, select Help->About (in the V8 Scan and Tune software).

    Boot Block: V2.07.07 (Feb 07, 2014
    )
    To view/update the Boot Block, click the [Check Firmware] button in the V8 Scan and Tune software.

    Firmware: V2.07.82 (Apr 10, 2015
    )
    To view/update the Firmware, click the [Check Firmware] button in the V8 Scan and Tune software.

    Regards
    The EFILive Development Team
    Last edited by Blacky; June 3rd, 2015 at 04:06 PM.
    Before asking for help, please read this.

  2. #2
    Senior Member DieselMafialb7's Avatar
    Join Date
    May 2012
    Posts
    109

    Default

    When will we have balance rate pids for the 10-12 6.10-12 6.7 cummins?

  3. #3
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,752

    Default

    Can these be viewed on the dealer scantool?
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  4. #4
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,259

    Default

    Paul, will people running March RC1 be able to open files created with this new release ??

    Or did the .ctz format change up again ??

    Thanks
    www.ridgerunnerdieselperformance.com

    tony@ridgerunnerdieselperformance.com

    Tuner of many, many Duramax and Cummins Diesels.


  5. #5
    Diesel Forum Support Site Admin
    Join Date
    Nov 2005
    Posts
    1,709

    Default

    The file format change was between public releases. The change was made with the first beta for 10-15 Cummins last November or December.

    Cheers
    Cindy

  6. #6
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,259

    Default

    Were the CAX files accidentally disabled from loading in this newest release, as they loaded up fine with the March RC1 Candidate ?

    Thanks
    www.ridgerunnerdieselperformance.com

    tony@ridgerunnerdieselperformance.com

    Tuner of many, many Duramax and Cummins Diesels.


  7. #7
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by GMC-2002-Dmax View Post
    Were the CAX files accidentally disabled from loading in this newest release, as they loaded up fine with the March RC1 Candidate ?

    Thanks
    No, nothing has changed with cax files. It may be something in the cax file. Try removing (commenting out) definitions until it loads.

    Regards
    Paul
    Before asking for help, please read this.

Similar Threads

  1. Known issues with April 13, 2015 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 32
    Last Post: April 30th, 2015, 07:33 AM
  2. Known issues with March 2015, Release Candidate 1
    By Blacky in forum Software Updates and Installation Help
    Replies: 59
    Last Post: April 10th, 2015, 09:03 AM
  3. March 2015, EFILive Release Candidate 1
    By Blacky in forum Software Updates and Installation Help
    Replies: 0
    Last Post: March 20th, 2015, 06:04 PM
  4. Known issues with Feb 14, 2015 release of the EFILive software and firmware.
    By Blacky in forum Software Updates and Installation Help
    Replies: 10
    Last Post: March 3rd, 2015, 02:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •