Deletes

**C_Beaman91** · June 1st, 2015

Originally Posted by mpdtune

I did a Fummins swap a few months ago using a 2013 motor with an 08 6.7 ECM. Wiring harness from Destroked. Works like a champ.

the end connectors are not identical? That would be so easy if they were.

**mpdtune** · June 2nd, 2015

Originally Posted by C_Beaman91

the end connectors are not identical? That would be so easy if they were.

Destroked used the '13 harness and the '08 harness to make it all work.

**C_Beaman91** · June 2nd, 2015

Originally Posted by mpdtune

Destroked used the '13 harness and the '08 harness to make it all work.

Gotcha, I'm going to attempt to re-pin the 12' harness to the 06' ECM. I've got pin-out info for both controllers so well see.

**2007 5.9** · June 2nd, 2015

Originally Posted by C_Beaman91

Gotcha, I'm going to attempt to re-pin the 12' harness to the 06' ECM. I've got pin-out info for both controllers so well see.

I hope you figure it out Cody...we need to get that bad boy going.

**WPDiesel** · July 27th, 2015

its tuff to do!!

**GMPX** · July 27th, 2015

I'm sure they appreciate you saying that on a public forum! Would you like the post removed?

**WPDiesel** · July 27th, 2015

Originally Posted by GMPX

I'm sure they appreciate you saying that on a public forum! Would you like the post removed?

I just thought everyone knew the tricks I'm sorry!!!

Thread: Deletes