Results 1 to 2 of 2

Thread: trailer brake controller

  1. #1
    Junior Member
    Join Date
    Jul 2014
    Posts
    22

    Default trailer brake controller

    Can full flashing any LML affect operation of the trailer brake controller if the segments are not all correct. I have a customer stating that their trailer brake controller stopped working sometime after tuning. I do not see anything under vehicle options that could affect this, but I could be wrong.

    Thanks in advance

  2. #2
    Lifetime Member THEFERMANATOR's Avatar
    Join Date
    Mar 2009
    Posts
    800

    Default

    I believe it can. I'm pretty sure others have had this happen with LMM's.
    1995 GMC 2500 SUBURBAN powered by 01 DURAMAX/ALLISON, little of this, a little of that,
    DIAMONDEYE 4" exhaust, CORSA muffler, AFE stage 1 dry filter, custom tuning by me, KENNEDY single pump and pump rub kit.

Similar Threads

  1. Vortec PCM/Controller not listed under DVT controller selection.
    By Scatfish in forum Vortec V6/V8 Specific
    Replies: 5
    Last Post: April 5th, 2015, 11:10 AM
  2. t/h and turbo brake?
    By lp14255 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: March 24th, 2014, 08:00 AM
  3. LMM "Trailer Brake System Service" message after DSP OS flash.
    By LReiff in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 17
    Last Post: September 20th, 2012, 06:12 AM
  4. What controller to use?
    By Straight 6 in forum Cummins 5.9L
    Replies: 4
    Last Post: June 25th, 2011, 12:55 AM
  5. V2 controller
    By twinki025 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: October 23rd, 2007, 04:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •