connecting scan tool to tune file?

[ogden08]

I am unable to connect my data log to my tune file like I have with the 5.9. I have downloaded the Callink att. but not sure if im doing it right. Do I need to place those files in a certain location or how does that work?

[joecar]

You need to place the xxx_link.ini file (where xxx is your ECM) into this folder: C:\Program Files\EFILive\V7.5\Configuration

( for example: CMB_Link.ini )

[ogden08]

ok I did that lastnight I will recheck and make sure I did it properly. If I am using a csp5 tune will it still work or does it need to be a single tune?

thanks for the help joecar

[ogden08]

[joecar]

Is your ECM a CMB or CMC...?

Also, within the xxx_link.ini file, you have to make sure it mentions the same pids that you logged (i.e. you have to log those pids, or add the pids you logged to that file; of course, the link pids for a table must be appropriate for that table).

[ogden08]

It is a CMC and I get what you are talking about now, I will look and make sure I have the right pids logged. I will let you know what I find.

Thanks