Results 1 to 10 of 65

Thread: Known issues with May 01, 2015 Public Release

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default Known issues with May 01, 2015 Public Release

    Currently known issues and possible workarounds for the May 01, 2015 Public Release of the EFILive Software and Firmware

    Download the public release software here: http://www.efilive.com/latest/cat/download-efilive


    • Software: V7.5.7.282
    • Software: V8.2.2.276
    • FlashScan/AutoCal firmware: V2.07.82



    Issue 1:
    If you are Black Box Logging PIDs from an ECM and TCM simultaneously and you have selected a PID from the transmission controller (TCM) that has an identically named PID in the engine controller (ECM), then when the log file is loaded back into the V8 software for viewing, that TCM PID will be displayed as if it originated from the ECM. The PID's data will have correctly been logged from the TCM, only its name will appear to indicate that it was logged from the ECM.
    Workaround:
    None.
    It is a restriction of the *.efi (V7.5 log file format). That restriction will be removed and the TCM PIDs will display their true origin once the V8 scan tool software is available.

    Issue 2:
    EFILive V7 pass-thru data logging does not record external PIDs correctly (i.e. PIDs used by wideband, dyno and third party data loggers).
    Workaround:
    Update your V7 software (to V7.5.7.283) using the option: Start->All Programs->EFILive->V7.5->Check For Updates.

    Issue 3:
    After successfully performing the "Check For Updates" option to update the installed software. Running the "Check For Updates" option again continues to report that "There is a newer version..." even though the software is up to date.
    Workaround:
    Resolved. Perform one more "Check For Update" to update the version numbers correctly.

    Issue 4:
    After stopping playback in the V8 scan tool the software incorrectly attempts to connect to the vehicle via FlashScan or AutoCal - even when FlashScan or AutoCal is not connected.
    Workaround:
    None. Will be fixed in the next update, scheduled for June 03, 2015.

    Issue 5:
    After a failed LML flash, recovery may not be successful and may fail with $0322 error.
    Workaround:
    Download the attached E86.zip file. Unzip the contents into the folder: \Program Files (x86)\EFILive\V8\Config. Overwrite the existing files. Retry the flash recovery.

    Issue 6:
    After a full-flash of an LS1B or E54 (LB7) controller, subsequent flashes may fail with the $0333 "Security Access Denied" error. The Seed and Key have incorreectly been set to $0000 and $0000 by the EFILive full-flash procedure.
    Workaround:
    An update to correct the fault will be made available ASAP (hopefully in the next 24-48 hours)
    Until then, when using the V8 pass-thru software to read or flash a controller, check both the "Try Alt Keys" and "Assume Lock May be Faulty" checkboxes.
    Attached Files Attached Files
    Last edited by Blacky; June 3rd, 2015 at 03:51 PM.
    Before asking for help, please read this.

Similar Threads

  1. Known issues with April 13, 2015 Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 32
    Last Post: April 30th, 2015, 07:33 AM
  2. April 2015, EFILive Public Release
    By Blacky in forum Software Updates and Installation Help
    Replies: 6
    Last Post: April 14th, 2015, 08:21 AM
  3. Known issues with March 2015, Release Candidate 1
    By Blacky in forum Software Updates and Installation Help
    Replies: 59
    Last Post: April 10th, 2015, 09:03 AM
  4. Known issues with Feb 09, 2015 release of the EFILive software and firmware.
    By Blacky in forum Software Updates and Installation Help
    Replies: 15
    Last Post: February 12th, 2015, 07:04 AM
  5. Known issues with Feb 2015 release of the EFILive software and firmware.
    By Blacky in forum Software Updates and Installation Help
    Replies: 14
    Last Post: February 9th, 2015, 10:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •