Hi All EFILive users.
I require some help with a starting issue I have with my LBZ conversion into a Aussie Nissan Patrol. ( Yes another Patrol & Aussie).
I have got the engine running but have got an issue with having to wait at least 12 seconds or more before the engine fire up properly & can drive away. It is like there is a extended wait to start feature there.

The engine will fire when the key is started straight away but then die's. It's as though it fires on rail pressure then die's. Try to start again and it is very sluggish to fire & takes some time before you can drive it.

Set up of the engine is as follows.
-Only has engine & trans Controllers.
-Wiring designed by myself.
-Have disabled the Vats (I think)
-Disable EGR (I think)
- Haven't use the ECM relay circuit to power up the ECM, have used the Nissan powering system

This is the first Conversion I have done & if anyone is willing to release info that could help me with this issue, I will be much appreciated.

If you want to PM info the will be appreciated also.

Regards Gards