Experienced Help with auto ve please
So i have been trying to get my auto ve to work for a little while now. It seems like when ever i convert my map with multipliers pretty much everything is gone and hardly any change is made to my ve table. Here is my pid selections am i missing something or does my ve table have to be in lambda? Thanks in advance. JoeAutove.pidJoeAutove.pid
Post some screenshots.
Do you have FlashScan V1 or V2...?
Your wideband is an LC-1...?
Post log files and current tune file.
Using and lc1 wideband and a v2. Here is the tune file and most recent logs. There are a couple of dyno pulls and one trip to the race track thats about a 45 min trip of mixed driving. rambler boost tune needs installed.ctztrip 2 track.efirambler13.efirambler12.efi
There is an a and a b map in the log a is out of boost b is in boost.
try to make one map with the entire map spectrum. Then split it up when you paste it back in. This worked best for me.
Ok I wil give that a go see if that helps me out. Can any one confirm for me weather or not the tune needs to be in lambda or if its ok to be in stoich???
I tune in lambda.
are you tuning to 14.7-stoich? if so it shouldn't matter. If anything else it would matter I believe.
edit- I tune in eq. (inverse lambda) this is how Joe set me up lol. worked perfectly(thanks Joe!)
Last edited by RADustin; May 29th, 2015 at 12:53 AM.
Yes 14.7 on the high side and I believe 11.5 low side
Posting Permissions
Reply With Quote