Results 1 to 3 of 3

Thread: Stalling Issue - Standard Cam

  1. #1
    Senior Member
    Join Date
    May 2015
    Posts
    172

    Default Stalling Issue - Standard Cam

    Just wondering if anyone can help me on a issue I am having, Car is a VZ SS LS1 A4, all stock apart from CAI and Exhaust. Have been doling the CALC.VET but for some reason when in gear and apply load with only a little throttle when the rpm comes down it fully drops and stalls out the engine? Haven't changed any idle conditions, only fiddled with the torque limiting stuff in gearbox etc to allow burnouts etc. Need advice as its holding me back.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post tune file and log file.

    Also, compare with stock tune just in case something else was inadvertently changed...

    Probably have to look at the idle air, increase or decrease it and see what difference it makes.

  3. #3
    Senior Member
    Join Date
    May 2015
    Posts
    172

    Default

    Joe, Here is a log of the Idle and Stall PIDS are related to IAC and Throttle Cracker, Other log is just the Driving Log.
    Attached Files Attached Files

Similar Threads

  1. What to log for stalling issue
    By gpr in forum Gen III V8 Specific
    Replies: 3
    Last Post: July 17th, 2014, 01:32 AM
  2. E40 Cam Cold Start issue........help please!!
    By quik95lt1 in forum Gen IV V8 Specific
    Replies: 12
    Last Post: December 19th, 2011, 02:31 AM
  3. Newbie w/cam swap idle issue
    By 99STEPSIDE in forum Gen III V8 Specific
    Replies: 3
    Last Post: February 2nd, 2009, 05:38 PM
  4. Need standard OS:12609099
    By limited cv8r in forum Gen IV V8 Specific
    Replies: 1
    Last Post: November 22nd, 2008, 06:52 PM
  5. Stalling issue... almost everywhere
    By lastcall190 in forum Gen III V8 Specific
    Replies: 4
    Last Post: November 21st, 2008, 07:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •