Results 1 to 6 of 6

Thread: My V2 wont read CAN BUS ECMS,, will read LS1B PCM,

  1. #1
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default My V2 wont read CAN BUS ECMS,, will read LS1B PCM,

    My V2 wont read or even connect or diagnose a CAn bus PCm, E38 or T43 or E92 it wont detect it,, my V2 is already updated,, what i can do? i have some cars i need to tune

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Earlier this year someone had contacted us about the same thing, turns out the last car they worked on was an LS1 conversion, someone had wired up the OBD-II port wrong and put +12V on the CAN pins! Anyway it damaged the CAN input on the V2. So thinking back what was the last vehicle you tuned? Any chance you could be in the same boat?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    Quote Originally Posted by GMPX View Post
    Earlier this year someone had contacted us about the same thing, turns out the last car they worked on was an LS1 conversion, someone had wired up the OBD-II port wrong and put +12V on the CAN pins! Anyway it damaged the CAN input on the V2. So thinking back what was the last vehicle you tuned? Any chance you could be in the same boat?

    Yes exactly the same, but it was with an E38, someone put 12v on one of the CAN pins, but the result of that was my v2 screen always in blank, no pictures, but it worked fine, last problems i had,, with 2014 and 2015 GM sierra trucks, i was having problems to connect to the vehicle,,, but now i cant connect, where do i send it to be repaired?

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    I'm guessing you are in the USA ?
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    Quote Originally Posted by GMPX View Post
    I'm guessing you are in the USA ?
    USA is the closest to me, is there any address to ship my flashscan?

    thanks

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Contact SoCal Diesel in CA - (661) 775-5620
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. Replies: 3
    Last Post: December 4th, 2011, 07:12 AM
  2. bbx wont read the engine tune
    By restless@westnet.com.au in forum Black Box Logging
    Replies: 7
    Last Post: October 16th, 2011, 01:10 PM
  3. VIN lic. wont read???!!!
    By 1badz2nv in forum FlashScan V2
    Replies: 3
    Last Post: May 25th, 2011, 02:48 PM
  4. I can't read my pcm
    By BlownSierra in forum Gen IV V8 Specific
    Replies: 4
    Last Post: November 28th, 2009, 09:38 PM
  5. Read posts in search...read tut..LM1 help.
    By onfire in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 15th, 2006, 01:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •