Results 1 to 9 of 9

Thread: learning to tune. any advice?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Jun 2015
    Posts
    5

    Default learning to tune. any advice?

    So I just got my V2 in the mail a few days ago. Been reading alot on here and other forums about learning to tune. This is one of the tunes I have made so far. Ive ran the tune a little bit but just curious to see what the more experienced tuners have to say about it. Truck is all stock (for now). wondering if egts would be too high or if I made any beginners mistakes. I did notice a slight lope at idle after it gets warmed up so that one thing Ill be looking into correcting. Any advice is appreciated. just trying to figure out what works and what doesn't! thanks for looking!
    Attached Files Attached Files
    Last edited by tunerintrainning; June 10th, 2015 at 08:12 AM.

Similar Threads

  1. First 6.7 Tune, looking for advice.
    By bill1977 in forum Cummins 6.7L
    Replies: 14
    Last Post: June 26th, 2014, 01:44 PM
  2. Advice needed, please take a look to my tune
    By DocZ28 in forum Gen III V8 Specific
    Replies: 34
    Last Post: October 17th, 2012, 01:12 PM
  3. Good N/A Tune but...Going Supercharged I could use advice on a base tune
    By tatasta in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 47
    Last Post: April 6th, 2011, 09:16 PM
  4. Advice on my transmission tune.
    By ippielb in forum Gen III V8 Specific
    Replies: 9
    Last Post: October 20th, 2010, 10:53 AM
  5. Need advice on a TT408 tune problem..
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 22
    Last Post: August 7th, 2005, 01:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •