Dashboard in Scan Tool
My needles have disapeered in the dashboard. What the heck happened? Now when i try to moniter the engine it will go straight to pause. (I assume that it goes straight to paus is because there are no needles in there.) Another thing is a couple days ago i did the personal to commercial upgrade that came with my EFI Live.
02' T/A convertable,ram air,Procharger-D1SC,dual intercooled,Patriot stage 2 heads,small comp cam,childs & albert rods,forged pistons,fast ls6 intake,90mm throttle body,NOS,TH400,2500stall,trans brake,moser rear w/4.10's,tubeler upper & lower A-arms,QA1 raceing shocks,tubeler drive shaft loops,subframe connecters,OK to much to list.There is more!! Dynoed @ 520hp & 580tq. at the tires without nitrous.6.9@93mph 1.7 60ft. in 1/8.
Im sure there are other and probably better ways to do this, but I'd start by verifying that you're using the latest release of both the scanning and flashing programs. You may be experiencing an incompatability problem between versions. You can download the latest at http://forum.efilive.com/showthread.php?t=2430.
Try that for openers.
DigitalEFI- EFILive US Distributor
sales@digitalefi.com
678/344-1590
Ok simple enough. Which one do i download? (I am new to this stuff.)
02' T/A convertable,ram air,Procharger-D1SC,dual intercooled,Patriot stage 2 heads,small comp cam,childs & albert rods,forged pistons,fast ls6 intake,90mm throttle body,NOS,TH400,2500stall,trans brake,moser rear w/4.10's,tubeler upper & lower A-arms,QA1 raceing shocks,tubeler drive shaft loops,subframe connecters,OK to much to list.There is more!! Dynoed @ 520hp & 580tq. at the tires without nitrous.6.9@93mph 1.7 60ft. in 1/8.
Also, try pressing the yellow or red button at the bottom of the scan tool and see if this helps
Download the April 26 release and follow the installation instructions. Then do the same with the May 03 updates.
DigitalEFI- EFILive US Distributor
sales@digitalefi.com
678/344-1590
Yea that fixed the problem!
02' T/A convertable,ram air,Procharger-D1SC,dual intercooled,Patriot stage 2 heads,small comp cam,childs & albert rods,forged pistons,fast ls6 intake,90mm throttle body,NOS,TH400,2500stall,trans brake,moser rear w/4.10's,tubeler upper & lower A-arms,QA1 raceing shocks,tubeler drive shaft loops,subframe connecters,OK to much to list.There is more!! Dynoed @ 520hp & 580tq. at the tires without nitrous.6.9@93mph 1.7 60ft. in 1/8.
Ok guys sorry for the same question again. My last laptop had a hard drive crash. I now have a new laptop and the SAME ISSUE is happening again. I tried to do the update (that fixed it last time using the link above) but no luck. It's done expired on that page or something. Any new update links?Originally Posted by 02' Hawk
02' T/A convertable,ram air,Procharger-D1SC,dual intercooled,Patriot stage 2 heads,small comp cam,childs & albert rods,forged pistons,fast ls6 intake,90mm throttle body,NOS,TH400,2500stall,trans brake,moser rear w/4.10's,tubeler upper & lower A-arms,QA1 raceing shocks,tubeler drive shaft loops,subframe connecters,OK to much to list.There is more!! Dynoed @ 520hp & 580tq. at the tires without nitrous.6.9@93mph 1.7 60ft. in 1/8.
Because that link and this thread are super old.
Try this.
EFILive V7.5 Scan And Tune Software For FlashScan V1, V2, AutoCal And AutoTap
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________
Thanks man. Just found it and it's at 50% already. Thanks again for the quick reply.
02' T/A convertable,ram air,Procharger-D1SC,dual intercooled,Patriot stage 2 heads,small comp cam,childs & albert rods,forged pistons,fast ls6 intake,90mm throttle body,NOS,TH400,2500stall,trans brake,moser rear w/4.10's,tubeler upper & lower A-arms,QA1 raceing shocks,tubeler drive shaft loops,subframe connecters,OK to much to list.There is more!! Dynoed @ 520hp & 580tq. at the tires without nitrous.6.9@93mph 1.7 60ft. in 1/8.
Posting Permissions
Reply With Quote