Results 1 to 7 of 7

Thread: Issue with running after tune instal

  1. #1
    Junior Member
    Join Date
    Jul 2015
    Posts
    14

    Default Issue with running after tune instal

    have an 06 and when i flash a tune into (i used the factory cal and modified it) the truck the trans geeks out and will put it in limp mode and throw an over temp code...

    another issue i have seemed to encounted is a random soft limiter after doing a second tune on it...worse under load

    if someone is willing and is familair i can email tunes so they can be looked at and maybe some insight if someone is willing to help or can pinpoint with some more information on my end. i'm going to do some data logging and try and figure out whats being limited...thing is it doesn't happen consistantly....

    Mike

  2. #2
    Junior Member
    Join Date
    Jul 2015
    Posts
    14

    Default

    nobody? lol

  3. #3
    Senior Member tylerltr450's Avatar
    Join Date
    Aug 2014
    Posts
    157

    Default

    Can you flash in your stock tune?
    2006 Cummins Red, Auto to Nv5600, SBC 3600, Traction Bars, Visor, Running Lights, S&B Intake, ATS intake horn, EFI Live, Borg Warner S363 Turbo, Industrial Injection Dragon Fly Injectors.

  4. #4
    Junior Member
    Join Date
    Jul 2015
    Posts
    14

    Default

    yes

  5. #5
    Senior Member tylerltr450's Avatar
    Join Date
    Aug 2014
    Posts
    157

    Default

    What is your os? is it upgradeable to csp5 or did you have to another one? When you flash in your stock tune does the truck work correctly?
    2006 Cummins Red, Auto to Nv5600, SBC 3600, Traction Bars, Visor, Running Lights, S&B Intake, ATS intake horn, EFI Live, Borg Warner S363 Turbo, Industrial Injection Dragon Fly Injectors.

  6. #6
    Junior Member
    Join Date
    Jul 2015
    Posts
    14

    Default

    it's one tune not A CSP5 tune. the OS came out of that truck so i figured it wouldn't have any issues. it is however Operating System 11352601

  7. #7
    Senior Member tylerltr450's Avatar
    Join Date
    Aug 2014
    Posts
    157

    Default

    I would suggest upgrading the CSP5 tune. it makes data logging easier might help figure out your problem.
    2006 Cummins Red, Auto to Nv5600, SBC 3600, Traction Bars, Visor, Running Lights, S&B Intake, ATS intake horn, EFI Live, Borg Warner S363 Turbo, Industrial Injection Dragon Fly Injectors.

Similar Threads

  1. Turbo 400 Instal...l What tune changes are needed?
    By auspeed in forum Gen IV V8 Specific
    Replies: 1
    Last Post: March 31st, 2014, 11:40 AM
  2. Instal
    By ckrumholt in forum Cummins 6.7L
    Replies: 4
    Last Post: March 13th, 2014, 12:55 AM
  3. my tune think its running a little rich
    By GOODIE454 in forum Gen III V8 Specific
    Replies: 4
    Last Post: March 21st, 2011, 12:43 AM
  4. Running lean after tune
    By SRT10KLLR in forum General (Petrol, Gas, Ethanol)
    Replies: 19
    Last Post: March 16th, 2009, 07:06 AM
  5. TRUCK WON'T START AFTER DSP5 instal
    By vortecfcar in forum General (Diesel)
    Replies: 4
    Last Post: June 8th, 2007, 05:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •