I no longer monitor the forum, please either post your question or create a support ticket.
just done all the updates for july 8 and cant read my lm1 on scan tool.
both efi 8(279) and 7.5 (286)are with latest updates.
2000 NBM trans am.
427 Dart ship block,Lme ported Ls7 heads 12.5 compression
246/262 .730/.712 112+4 low lash solid roller
Rmvb 4l80 with transbrake, 8" FTI converter
12 bolt Moser rear end with 4.10 gears
Hi Cindy,
No I didn't try BBX so i'll give that a go, and the little lappy I use is very old so doubt it has USB3, probably USB2.
Cheers G.
2005 HSV Maloo Ute, HKE 457ci Stroker LS2 E40, TFS 245's, 255/263 Hi Lift HUC, FAST LSXr 102, NW Billet 102 TB, FLT Level 7 4L65E, CircleD 4200 stall, Duspeed OTRCAI - Mafless, DF 1 7/8" LT's, 3" DiFilipo Duals, Serial LC-1 WB's
"An Old Dog learning new tricks"
Ah, OK, that's possibly why I had trouble getting into the TCM then?
Thanks.
2005 HSV Maloo Ute, HKE 457ci Stroker LS2 E40, TFS 245's, 255/263 Hi Lift HUC, FAST LSXr 102, NW Billet 102 TB, FLT Level 7 4L65E, CircleD 4200 stall, Duspeed OTRCAI - Mafless, DF 1 7/8" LT's, 3" DiFilipo Duals, Serial LC-1 WB's
"An Old Dog learning new tricks"
2005 HSV Maloo Ute, HKE 457ci Stroker LS2 E40, TFS 245's, 255/263 Hi Lift HUC, FAST LSXr 102, NW Billet 102 TB, FLT Level 7 4L65E, CircleD 4200 stall, Duspeed OTRCAI - Mafless, DF 1 7/8" LT's, 3" DiFilipo Duals, Serial LC-1 WB's
"An Old Dog learning new tricks"
Not sure if tied to this release but having an issue with the compare feature. Its not showing all the items that are different. In addition same vehicle will not run when copy and pasting a know IFR table I have used forever..flip back to stock IFR car will run. This is not a matter of "calibration" but seems to be like something is not going into the right place.... this is just another day here with an E38 nothing new but chasing these issues...
www.redline-motorsports.net
1-954-703-5560
2006 ZO6 895/866 with APS TT
2010 SSRS Camaro HTR-900TT (798/801)
2011 HTR-850R Camaro
2012 ZL1 Auto (10.33@135 MPH) Video Here!
Can you please send me two *.ctz files that have differences that are not showing up in the compare?
And can you also send me two *.ctz files, one before the IFR changes are pasted into it that does run and then the one with the IFR changes pasted into it that does not run?
Thanks.
Send to paul@efilive.com with a link to this thread.
Regards
Paul
Before asking for help, please read this.