Known issues with July 08, 2015 Public Pre-Release

[GMPX]

Also this car does not have an ignition key, you have to have the fob in your pocket. You have to press the brake ( before pressing the dash mounted engine starter button).

Holding your finger on the start button for about 5 seconds WITHOUT your foot on the brake is the equivalent of turning the IGN on with the old key systems, you need to do that.

[Aint Skeered]

just done all the updates for july 8 and cant read my lm1 on scan tool.
both efi 8(279) and 7.5 (286)are with latest updates.

[cindy@efilive]

just done all the updates for july 8 and cant read my lm1 on scan tool.
both efi 8(279) and 7.5 (286)are with latest updates.

Have responded in your other thread with V8 Scan and Tune instructions on Wideband configuration.

Cheers
Cindy

[MyM8V8]

Hi Cindy,

No I didn't try BBX so i'll give that a go, and the little lappy I use is very old so doubt it has USB3, probably USB2.

Cheers G.

[MyM8V8]

Ah, OK, that's possibly why I had trouble getting into the TCM then?

Thanks.

[MyM8V8]

Holding your finger on the start button for about 5 seconds WITHOUT your foot on the brake is the equivalent of turning the IGN on with the old key systems, you need to do that.

Ah, OK. That's possibly why i had issues connecting to the TCM.

Cheers G.

[Redline Motorsports]

Not sure if tied to this release but having an issue with the compare feature. Its not showing all the items that are different. In addition same vehicle will not run when copy and pasting a know IFR table I have used forever..flip back to stock IFR car will run. This is not a matter of "calibration" but seems to be like something is not going into the right place.... this is just another day here with an E38 nothing new but chasing these issues...

[minytrker]

Not sure if tied to this release but having an issue with the compare feature. Its not showing all the items that are different. In addition same vehicle will not run when copy and pasting a know IFR table I have used forever..flip back to stock IFR car will run. This is not a matter of "calibration" but seems to be like something is not going into the right place.... this is just another day here with an E38 nothing new but chasing these issues...

I have had this happen also on several E38's and I am not on the current release.

[Blacky]

Not sure if tied to this release but having an issue with the compare feature. Its not showing all the items that are different. In addition same vehicle will not run when copy and pasting a know IFR table I have used forever..flip back to stock IFR car will run. This is not a matter of "calibration" but seems to be like something is not going into the right place.... this is just another day here with an E38 nothing new but chasing these issues...

Can you please send me two *.ctz files that have differences that are not showing up in the compare?
And can you also send me two *.ctz files, one before the IFR changes are pasted into it that does run and then the one with the IFR changes pasted into it that does not run?
Thanks.

Send to paul@efilive.com with a link to this thread.

Regards
Paul

[Dirktdolman]

Did anyone else receive this message from their Anti-Virus?