Results 1 to 5 of 5

Thread: Having issue deletin gECT torque Management during 1-2 shift

  1. #1
    Junior Member
    Join Date
    Apr 2013
    Posts
    38

    Default Having issue deletin gECT torque Management during 1-2 shift

    Tuned 2003 GMC truck with a cammed 4.8. all was going well until we increased the 1-2 shift point then we noticed a big delay during the 1-2 shift, on the scanner it show TPS going from 99.6 down to about 30% then back up to 99.6. I also noticed that the commanded A/F goes to 14.68 ....even after the completed shift....I think disabled all the abuse tables and tq managment reduction tables but there has to be something i am missing. What also puzzles me is that there is no TPS dip on the 2-3 shift like there is on the 1-2....

    What has to be done to get the pedal TPS to match the actual Throttle blade on drive by wire setups...

    I started to modify B6612 but felt no difference setting the 5000+ rpm cells to 100%, Any ideas?
    Attached Files Attached Files

  2. #2
    Junior Member
    Join Date
    Apr 2013
    Posts
    38

    Default

    Here is the log showing the Throttle TPS falls to 30% during the 1-2 shift, no timing falls, just TPS
    Attached Files Attached Files

  3. #3
    Junior Member
    Join Date
    Apr 2013
    Posts
    38

    Default

    I think I just found it...When I increased the rpm shift point I didnt increase B5401(ECT rpm limit) This makes sense as the 1-2 is set to shift at 6100rpm and the 2-3 shift set to 5750 ..only happens on the 1-2 shift as B5401 is limiting rpm to 5900(right where ECT fallsin %) Now to test

  4. #4
    Lifetime Member
    Join Date
    Jan 2014
    Posts
    327

    Default

    Please post resolution.

  5. #5
    Junior Member
    Join Date
    Apr 2013
    Posts
    38

    Default

    Quote Originally Posted by RADustin View Post
    Please post resolution.
    I will try it this weekend when he comes bac
    k

Similar Threads

  1. Replies: 21
    Last Post: July 7th, 2013, 10:31 AM
  2. Trans Abuse Mode vs Shift Torque Management
    By DrX in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 1
    Last Post: August 24th, 2012, 02:38 AM
  3. Torque Management
    By FUBAR in forum Cummins 5.9L
    Replies: 9
    Last Post: September 6th, 2011, 09:16 PM
  4. torque management
    By snoxracer247 in forum Gen III V8 Specific
    Replies: 0
    Last Post: December 28th, 2007, 10:33 AM
  5. Torque management
    By APE346 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 6
    Last Post: March 29th, 2005, 12:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •