Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: 96 vortec 7.4 0411 swapped still needs a basic tune that works

  1. #21
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    363

    Default

    Oops. I found a few mistakes in my previous file and corrected them so anyone who downloaded the attachment please delete it and use this one.
    Last edited by SS2win; July 9th, 2017 at 12:58 PM. Reason: removed old link
    2001 Camaro SS #2020
    Stock LS1 w/InconTT | REV Springs | Ti retainers | M6 | McLeod Twin Clutch
    UMI RR K Member | SLP Subframe Connectors | Global West TA | BMR PHB | Metco LCA
    996 Brake Kit| 17" CCW Classics | 17x11 ZR1 Replicas on all four corners

    425@6lbs | ???@12lbs | EFILive Custom OS3 | !MAF | SD
    11.73@12x/1.7 on worn out nittos... yaaawn!

  2. #22
    Junior Member krwyellowz28's Avatar
    Join Date
    Apr 2013
    Posts
    12

    Default

    Thank you for replying back with such good info SS2win. I'm swapping a '99 454 into a '70 C10. The 454 is currently in a running/driving burb, and I think the best plan of attack is to do the 0411 swap in the burb, work out any kinks that come up from the ECM swap, and then mod the harness for the C10 swap. I'll report back how it goes.

  3. #23
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    363

    Default

    I'm glad the information is useful to you. The 411 swap is really the best mod you can do. My tune should get it going pretty smooth to start with. I have over run around 30k on it now without issue. Let me know how it goes for you and if you need any help.
    2001 Camaro SS #2020
    Stock LS1 w/InconTT | REV Springs | Ti retainers | M6 | McLeod Twin Clutch
    UMI RR K Member | SLP Subframe Connectors | Global West TA | BMR PHB | Metco LCA
    996 Brake Kit| 17" CCW Classics | 17x11 ZR1 Replicas on all four corners

    425@6lbs | ???@12lbs | EFILive Custom OS3 | !MAF | SD
    11.73@12x/1.7 on worn out nittos... yaaawn!

  4. #24
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,958

    Default

    SS2Win, are you running the stock torque converter for your 4L80E (I'm just curious)...?

  5. #25
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    363

    Default

    I don't think so but it was work done by the PO so I am not 100% sure. Why do you ask?
    2001 Camaro SS #2020
    Stock LS1 w/InconTT | REV Springs | Ti retainers | M6 | McLeod Twin Clutch
    UMI RR K Member | SLP Subframe Connectors | Global West TA | BMR PHB | Metco LCA
    996 Brake Kit| 17" CCW Classics | 17x11 ZR1 Replicas on all four corners

    425@6lbs | ???@12lbs | EFILive Custom OS3 | !MAF | SD
    11.73@12x/1.7 on worn out nittos... yaaawn!

  6. #26
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,958

    Default

    I'm wondering what it stalls at, and if you made any tune adjustments for this, just curious

  7. #27
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    363

    Default

    Come to think of it, I used a base tune that may have had some mods to the trans. I didn't like the way it worked and so I found a stock silverado tune and did a segment swap. Don' think I uploaded that here yet. Do you see something in the tune?
    2001 Camaro SS #2020
    Stock LS1 w/InconTT | REV Springs | Ti retainers | M6 | McLeod Twin Clutch
    UMI RR K Member | SLP Subframe Connectors | Global West TA | BMR PHB | Metco LCA
    996 Brake Kit| 17" CCW Classics | 17x11 ZR1 Replicas on all four corners

    425@6lbs | ???@12lbs | EFILive Custom OS3 | !MAF | SD
    11.73@12x/1.7 on worn out nittos... yaaawn!

  8. #28
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,958

    Default

    No, I'm just curious, I just like to know/learn.

  9. #29
    Lifetime Member SS2win's Avatar
    Join Date
    Feb 2005
    Posts
    363

    Default

    And here I was hoping you could tell me something about it. lol cheers

    Here's the last one I will post. This includes the trans seg swap with a 2002 6.0 silverado. It fixes some problems with the trans that I never bothered to track down as it was easier to start over. While this tune has worked very well for me, your mileage may vary. I would like feedback if you have any comments. Otherwise, I hope it helps.

    454_SS2win based on 2002 Chevrolet Express (4L80E) Van Automatic L31 5_0006.ctz
    2001 Camaro SS #2020
    Stock LS1 w/InconTT | REV Springs | Ti retainers | M6 | McLeod Twin Clutch
    UMI RR K Member | SLP Subframe Connectors | Global West TA | BMR PHB | Metco LCA
    996 Brake Kit| 17" CCW Classics | 17x11 ZR1 Replicas on all four corners

    425@6lbs | ???@12lbs | EFILive Custom OS3 | !MAF | SD
    11.73@12x/1.7 on worn out nittos... yaaawn!

  10. #30
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,958

    Default

    If driveability is good, don't mess with it, unless absolute necessary.

    I'll look at that tune later tonite.

Page 3 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. 0411 swap on 99 Vortec 454
    By N0DIH in forum RoadRunner Real-Time PCM Emulator
    Replies: 10
    Last Post: January 22nd, 2013, 11:49 AM
  2. Replies: 22
    Last Post: December 23rd, 2012, 03:44 PM
  3. 0411 PCM used to run a '96 4.3 V6 Vortec Engine
    By Ben_R in forum Vortec V6/V8 Specific
    Replies: 2
    Last Post: November 24th, 2011, 05:55 AM
  4. 0411 computer in 2000 S-10 w/5.7 Vortec
    By lowriders10 in forum Vortec V6/V8 Specific
    Replies: 24
    Last Post: June 19th, 2009, 12:03 PM
  5. Wiring for 97 vortec to 02 0411
    By redhotrod in forum Vortec V6/V8 Specific
    Replies: 11
    Last Post: November 19th, 2008, 02:57 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •