Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Can't record Analog voltages in pass through mode!!!

  1. #1
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    298

    Default Can't record Analog voltages in pass through mode!!!

    Tested all four analog in channels.

    On self test can see moving voltages.
    When BBX logging can see moving voltages.

    When trying to use my laptop and EfiLive Scan 7.5.7 build 283 latest version on website all I see is 0 volts on all four channels. All over PID logging and functionality appears to be working. Possible bug?

    Has anyone heard of this issue?

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    PM me a link to this thread.

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Try installing V7 build 286 from here: July-08-2015-EFILive-Public-Pre-Release

  4. #4
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    298

    Default

    Hi Joe,


    I have updated to the suggested version in the links above. Happy to announce a partial success.

    When I try to connect to flash scan only and only select the analog 1 PID I can see the moving voltage. Hurray!

    Howver, when I select my normal PID file I get an error and can't log. I will try to rebuild my PID file to see if it fixes the issue but due to limited time resources on my side it could take a couple of days to report back.



    Click image for larger version. 

Name:	efilive error.JPG 
Views:	241 
Size:	181.0 KB 
ID:	18640

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post your calc_pids.txt file here.

  6. #6
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by 2002_z28_six_speed View Post
    Hi Joe,


    I have updated to the suggested version in the links above. Happy to announce a partial success.

    When I try to connect to flash scan only and only select the analog 1 PID I can see the moving voltage. Hurray!

    Howver, when I select my normal PID file I get an error and can't log. I will try to rebuild my PID file to see if it fixes the issue but due to limited time resources on my side it could take a couple of days to report back.



    Click image for larger version. 

Name:	efilive error.JPG 
Views:	241 
Size:	181.0 KB 
ID:	18640
    That "error response 5" message was a bug in an old version of the software/firmware.
    After updating your V7 software, make sure you also updated your V8 soaftware and your FlashScan firmware using the [Check Firmware] button on the main window of the V8 software.

    Regards
    Paul
    Before asking for help, please read this.

  7. #7
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    298

    Default

    I can't exactly say what fixed this but the error message is not coming up anymore. Logging is working. Thanks to all!

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Stuff unhappens...

  9. #9
    Lifetime Member
    Join Date
    Jan 2007
    Posts
    298

    Default

    Well junk. It seems that the fix is still partial. Some PIDs can be logged through pass through mode and other cause it to have the same error as above.

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which pids are loggable, and which are not...?

    Post your log file.

Page 1 of 2 12 LastLast

Similar Threads

  1. Downloaded v8 trying to scan dsp5 voltages
    By KCCORRAL in forum General
    Replies: 1
    Last Post: September 10th, 2013, 01:58 AM
  2. Replies: 4
    Last Post: March 15th, 2012, 08:51 AM
  3. DSP5 not switching voltages
    By lakingslayer in forum Duramax LB7
    Replies: 1
    Last Post: May 26th, 2010, 12:49 AM
  4. DSP5 Voltages
    By ruralgas in forum Duramax LLY
    Replies: 4
    Last Post: May 17th, 2010, 04:36 PM
  5. Innovate LM-1 Voltages.
    By curtbriggs in forum General
    Replies: 2
    Last Post: September 4th, 2005, 02:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •