Page 1 of 2 12 LastLast
Results 1 to 10 of 23

Thread: OS Fault Aborted FULL PROGRAMMING Failure.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default OS Fault Aborted FULL PROGRAMMING Failure.

    I loaded my AutoCal saved ctz file into my autocal, unplugged it, and then attempted to do a full program directly from the AutoCal, I got that message "OS FAULT ABORTED". What am I doing wrong? plus "ERROR $0540"

    Firmware and all are all up to date.

    When I attempt to use Scan & Tune to go directly through the AutoCal for a FULL SCAN, I get "Incompatible Operating System"

    Please advise.
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  2. #2
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    What controller(s) was the AutoCal setup for Scan, and Read/Flash?
    What controller are you attempting to flash and scan?

    It sounds like the controller setup on AutoCal is different to the controller in the vehicle you are connecting to.
    Alternatively, perhaps only a tune file was moved to the AutoCal and that BBX controller configurations for Scan, and Read/Flash were never copied over.

    Cheers
    Cindy

  3. #3
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Controller was/is setup for E67. I'm attempting to full program the same type of E67 ECM. The ECM has an 2007 tune in it I'm trying to overwrite it with a 2008. I did only copy over the file into the TUNE folder. Do I need to copy the CTZ to the Read/Scan folders too? I see a COZ file in there too.
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by TBMSport View Post
    The ECM has an 2007 tune in it I'm trying to overwrite it with a 2008.
    The software is stopping the ECM from getting corrupted, many 2007 OS's are not compatible with 2008 OS's.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Quote Originally Posted by GMPX View Post
    The software is stopping the ECM from getting corrupted, many 2007 OS's are not compatible with 2008 OS's.
    I understand that, but I have overwritten this OS' s before. Is this due to the fact that it's not a .tun file?
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  6. #6
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    With EFILive? .tun or .ctz won't make a difference, the same checks are done in V7.5 and V8.
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Quote Originally Posted by GMPX View Post
    With EFILive? .tun or .ctz won't make a difference, the same checks are done in V7.5 and V8.
    Yes, sir, with EFILive. It's been a while since I last had to do it and it was before I recently upgraded the firmware and boot, but yes I've done it multiple times including my personal trucks. So obviously, I just need to find a work-around solutions. Thanks for timely replies, guys!
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  8. #8
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Can you please list what OS you are trying to flash and what is in the ECM. We haven't changed the lists from when they were first introduced.
    I no longer monitor the forum, please either post your question or create a support ticket.

  9. #9
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Sorry, real life got in the way.

    The OS's are:
    12618164
    12611938
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

  10. #10
    Senior Member
    Join Date
    May 2009
    Posts
    192

    Default

    Additionally, I now am unable to Full Flash a T43. I wish to put the original 24239353 that was previously changed by a shop to 24249179, however I can no longer do it since everything has gone to the .CTZ only format. Please advise.
    Trailblazer "RS" 5.3L 6L80 4x4 & '07 TBSS LS2 6L90 AWD

Page 1 of 2 12 LastLast

Similar Threads

  1. General Programming Failure ($85) $0385 With Autocal
    By Mitco39 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 3
    Last Post: August 7th, 2013, 02:09 AM
  2. Fault
    By GMLSI in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: November 3rd, 2007, 04:56 AM
  3. OL-Fault
    By NewV in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: January 9th, 2007, 11:07 PM
  4. OL-Fault?
    By Bruce Melton in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: April 23rd, 2005, 04:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •