Paul is off sick at the moment, might be a day or two before he is back on board.
Paul is off sick at the moment, might be a day or two before he is back on board.
I no longer monitor the forum, please either post your question or create a support ticket.
Your right, the refresh button is not working. I had EFILive Explorer open while saving tune files in V8 and they were not appearing even after refreshing in EFILive Explorer. I did find if I moved out of the chosen folder in the top left portion of the EFILive Explorer screen and then re-navigated back into the chosen folder the refresh did occur. I then sorted by date so I could quickly see the added files.
Maybe that is a better work around for you until Paul is back on deck and can follow it up.
Cheers
Cindy
You should check your properties settings that automatically apply each time you save a tune file. I'm certain in a recent release (sometime between May and now) we had a software warning in the release notes to check your default settings after the update.
In V7 software these are located by navigating to the Permissions tab.
In V8 software these are located by navigating to Edit -> Properties -> General -> Files/Folders
Cheers
Cindy
Sounds like the problem I had nice,This stuff is going to make us all crazy
"to check your default settings after the update." every time? Or just the once? "the update" which one? This one or one of the ones before it?
"A non-restricted version" does that mean a tune that has the restrictions lifted through V8 before doing it in the V7 window?
2005 1500 HD , Custom OS3 SD tune .
2006 Trailblazer
Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .
https://forum.efilive.com/showthread.php?p=217904
It was the april release that could potentially reset security settings, and the warning was in the release notes as well as in the discussion
2010 Dodge QCSB 6.7 Auto
It was the public release dated May 2015. http://www.efilive.com/latest/cat/do...se-may-01-2015
A non restricted version refers to not applying those restrictions on V7 or V8, or removing existing restrictions with V8.
Did adjusting the permissions/properties defaults fix your issue?
Cheers
Cindy
I no longer monitor the forum, please either post your question or create a support ticket.
with the newest update does it as the OS upgrade for csp options??
CSP has been out for all supported Cummins ECM's for quite some time now.
I no longer monitor the forum, please either post your question or create a support ticket.
The [Refresh] button only refreshes the lower pane, i.e. it only regenerates the list of files by re-querying the attached device.
The F5 hot key works in one of two ways:
- If the focus is in the top pane, it refreshes the top pane, i.e. it re-reads the folder from the PC hard drive.
- If the focus is in the bottom pane, it does the same as clicking on the [Refresh] button.
So if you want to refresh the top pane (the list of files on your PC), you must click in the top list to give that list focus, then press the F5 hotkey to refresh the contents. Note, refreshing the top pane causes the currently selected "sort by" column to be lost and the pane is refreshed in its default order - so the file you're looking for may not appear in the "sorted" order as expected.
Regards
Paul
Before asking for help, please read this.