Results 1 to 10 of 16

Thread: License removal and transfer to another V2?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Cougar281 View Post
    How do you figure? If you were to assume that the mechanism designed to move the license exported and removed the entire license from the v2 (the process moves license 'abc' tied to s/n '123' and '456' off the v2 to a file, so say for example you had 1 license on the v2, you now have 0).

    If you were talking about 'divorcing' the licensed controllers from the license on the v2 that they're 'married' to, I can see your point, but if you maintain the bond between the license and the licensed controller(s), I don't see the issue.

    One such use case I can think of is say I have a vehicle the I've been tuning with efilive, and I decide to sell it. The new owner has a v2 as well. What's the issue with being able to remove the license in its entirety from my v2 and give it to the new owner of the vehicle?
    Ok, I see your point, you're saying remove the married license from one V2 and add it to another V2 so this V2 can now flash that same ECM... good thought...

    the problem I see (and I'm no expert) is when the license is in between V2's (i.e. on your PC, encrypted in a file) it is impossible to keep it from being duplicated (for example, copy the license file to a new PC and install V7/V8 software from scratch)...?

    Currently, licenses residing on the V2 hardware is what provides a layer of security.

  2. #2
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    225

    Default

    Quote Originally Posted by joecar View Post
    Ok, I see your point, you're saying remove the married license from one V2 and add it to another V2 so this V2 can now flash that same ECM... good thought...

    the problem I see (and I'm no expert) is when the license is in between V2's (i.e. on your PC, encrypted in a file) it is impossible to keep it from being duplicated (for example, copy the license file to a new PC and install V7/V8 software from scratch)...?

    Currently, licenses residing on the V2 hardware is what provides a layer of security.
    I think he means to totally delete it from V2 #1 before adding it to V2 #2 Joe so it can only be used on a single device at any one time, I can see the sense in this as the new owner doesn't want or need your old Licences, I ran into this back when I had HP, sold it then bought another so lost the original licenses..

Similar Threads

  1. license transfer
    By amishmafia00 in forum FlashScan V2
    Replies: 4
    Last Post: December 3rd, 2014, 12:33 AM
  2. Transfer VIN license? Selling truck
    By NickBeek in forum Purchase and Shipping
    Replies: 1
    Last Post: August 22nd, 2014, 07:06 PM
  3. Bad ECM, license transfer?
    By vic in forum FlashScan V1
    Replies: 7
    Last Post: April 16th, 2013, 09:11 PM
  4. Transfer VIN license
    By ClarkFarmsDiesel in forum Purchase and Shipping
    Replies: 4
    Last Post: October 2nd, 2011, 06:37 PM
  5. Flashscan has license avail. but won't let me license PCM
    By Wasted Income in forum Purchase and Shipping
    Replies: 1
    Last Post: April 6th, 2007, 10:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •