Results 1 to 10 of 10

Thread: LML Stock Data Log - Reduced Engine Power Flag REP18?

  1. #1
    Junior Member
    Join Date
    Jan 2011
    Posts
    39

    Default LML Stock Data Log - Reduced Engine Power Flag REP18?

    I have a local customer with a completely stock 2011 LML - I ran some baseline data logs on his stock tune and I see REP18 indciated and the driver requested torque values were only ~ 700 lb-ft at 2400+ rpm. Maybe that is normal, I see the torque limit tables only allow the max 765 lb-ft at ~ 1700 rpm and the truck did hit 390 hp at ~ 3200 rpm. Can someone comment on what they are typically seeing for driver requested and actual torque on a bone stock LML and what REP18 indicates? No DTC codes reported, truck was not in regen mode, DPF shows 27g, DEF fluid was not low. Customer said that there was a problem previously where his truck was stuck in regen mode and the dealer recently fixed that issue, but he has not seen a regen triggered since the dealer had it over 6 months ago. I did a quick tune with a +65 ft-lb increase and it did pick up ~ 60 ft-lb around 2400 rpm so it is probably fine, just looking for confirmation since this is the first diesel truck I have worked on. Anyone else logging REPFLAG and is REP18 just the normal flag? Stock log attached.
    I did look in GM Tech Info and could not find any information on what REP flags 0-36 are assigned to.

    Cheers,
    Brian
    Attached Files Attached Files

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    We just added the descriptions in for those last week, you'll see them soon.
    FWIW, REP18 = "DEF Poor Quality"
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member
    Join Date
    Jan 2011
    Posts
    39

    Default

    Thanks Ross, that might shed some light on the lower than expected stock torque values. DEF pressure increases as NOX reduction efficiency drops, torque is reduced based on higher DEF pump pressure. So REPFlag18 is basically due to NOX sensor 1 - NOX Sensor 2 showing low SCR efficiency.

    Cheers,
    Brian

  4. #4
    Lifetime Member Road's Avatar
    Join Date
    Feb 2015
    Posts
    336

    Default

    Have the reduce power descriptions been added yet? If so I can't seem to locate them. I am looking for reduce power 14 currently.

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Yes they should be showing, I am just posting the descriptions from the PID 'GM.REPFLAG'.
    However '14' isn't one that we know of sorry.
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    Lifetime Member Road's Avatar
    Join Date
    Feb 2015
    Posts
    336

    Default

    I had one that wouldn't downshift with no codes and the only thing I found was the reduce power 14. I was able to fix the problem with a reflash but the reduce power 14 is always showing. Problem is fixed thanks

  7. #7
    Lifetime Member
    Join Date
    Jan 2006
    Posts
    387

    Default

    Quote Originally Posted by GMPX View Post
    We just added the descriptions in for those last week, you'll see them soon.
    FWIW, REP18 = "DEF Poor Quality"
    Were would we find these descriptions I have a rep13 &14? Thanks

    Edit: V2 shows rep13 and pass and old v7.5 scan software shows rep14 at the same time
    haha
    Last edited by rcr1978; May 6th, 2016 at 07:37 AM.
    04 LB7
    2010 LMM
    2015 LML

  8. #8
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    flip a coin and choose
    Thanks, we'll check it out.
    I no longer monitor the forum, please either post your question or create a support ticket.

  9. #9
    Lifetime Member
    Join Date
    Jan 2006
    Posts
    387

    Default

    ok thanks
    04 LB7
    2010 LMM
    2015 LML

  10. #10
    Member
    Join Date
    Jan 2016
    Posts
    74

    Default

    Quote Originally Posted by rcr1978 View Post
    Were would we find these descriptions I have a rep13 &14? Thanks

    Edit: V2 shows rep13 and pass and old v7.5 scan software shows rep14 at the same time
    haha

    Did you ever figure this out? I would love a list of all the REP reasons. I'm showing 13

Similar Threads

  1. Reduced Engine Power mode help
    By JUSTASBC in forum Petrol / Gas
    Replies: 52
    Last Post: July 15th, 2012, 12:46 PM
  2. Reduced Engine Power help please
    By JUSTASBC in forum Petrol / Gas
    Replies: 3
    Last Post: August 25th, 2011, 11:55 PM
  3. Reduced engine Power
    By Webbs in forum Gen III V8 Specific
    Replies: 9
    Last Post: February 3rd, 2011, 08:18 AM
  4. Looking for some data from a stock engine log
    By Kevin Doe in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: June 24th, 2008, 03:14 AM
  5. Reduced engine power
    By redlinepd in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: July 7th, 2007, 07:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •