Results 1 to 2 of 2

Thread: LNC-2000 Retard Pid

  1. #1
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    937

    Default LNC-2000 Retard Pid

    Trying to create a pid for the amount of timing being pulled from the LNC-2000.

    According to the lnc-2000 manual the signal is a linear voltage from 0.2 to 4.8
    Timing Retard 0-15 degrees

    I have setup the following and it's close to what I think it should be doing seeing as we have 4 degrees of retard set and the highest point it hits is 4.

    *CLC-00-2052
    V 0.2 4.8 .2 "{EXT.AD1}"
    Deg 0 15 .2 "{EXT.AD1}/2*5"

    Is that correct?

    Annoyingly someone from LPE posted that it's a 0v-3v. (this is correct. I was reading the wrong wire)
    http://ls1tech.com/forums/nitrous-ox...l#post18462221

    BUT, the device is constantly outputting 0.2v when the controller is on so I think he is talkin about a different device
    Last edited by Tre-Cool; September 4th, 2015 at 12:51 AM.

  2. #2
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    937

    Default

    So it looks like I might be pulling more timing out than I thought from the lnc, we did up the nitrous shot to 250.

    I've come up with the following now as it's supposed to be 0.2v for every degree, but even this doesn't seem right as it's always running near on 0.2v which means it's constantly pulling 1 degree of timing.

    *CLC-00-2052
    V 0.2 3 .2 "{EXT.AD1}"
    Deg 0 15 .2 "{EXT.AD1}/0.2"

Similar Threads

  1. How about a mph/retard?
    By Highlander in forum Custom Operating Systems
    Replies: 7
    Last Post: September 5th, 2009, 09:41 AM
  2. AC spark retard?
    By GMCtrk in forum Gen III V8 Specific
    Replies: 1
    Last Post: August 28th, 2009, 01:26 PM
  3. e38 dma pid SCALEDCORVE_ doesnt work plus a bad calc pid
    By ringram in forum FlashScan V2 BB Logging
    Replies: 2
    Last Post: November 30th, 2008, 10:28 AM
  4. Knock Retard GM.KNKRET vs Retard Due to Knock GM.KR
    By Gelf VXR in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: March 9th, 2008, 03:18 AM
  5. Knock Retard
    By esco35m in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: October 8th, 2007, 11:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •