Last edited by joecar; August 27th, 2009 at 10:22 AM. Reason: correction in red/green ink
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
TS,
Correction:
V1 will not be supported by software V8.
V1 will continue to be supported by V7 software (see post #265 below).
19980200 will continue to be supported by both V1 and V2.
You will still be able to use your V1 to flash your 1998, and to convert it to a 2002 or COS as you said...
V2 is required only if you have a vehicle with a newer PCM (e.g. E38, E40, E67).
Last edited by joecar; August 27th, 2009 at 09:49 AM.
Thanks Guys,
That answered my question very well. I am looking into the small computer setup so that is great news and I hope that i will be able to do that money wise. I think that would be cool to have EFILive right there all the time in your dash board so thanks as we get allot of snow where I live and winters are long so I will soon have allot of time to plan it out. Did I ever tell you guys we used to walk 6 miles to school up hill both ways with only tennis shoes and no socks (we did have clothes of course) in 6 feet of snow? My youngest kids are all back in school now, today was the youngest ones first day as a senior in high school. I have been a member of this forum since 2006 and LS1 edit since 2004. Where does the time go?
98 tigershark
98 tigershark
L92/427 w/L76 CC'ed heads n upgraded springs
4.100 stroke, 4.068 bore w/ 11:1 comp
Cam, 591 int, 613exhst, 232-246dur@.050, 115*
LG headers, High flow cats,
RPM level 5 trans, RPM 3.42 gears, 2800 rpm trq convrt. .
Special Thanx to Joe and Bruce!
FlashScan V1 will continue to be supported by software V7 (which will continue to be available indefinitely).Originally Posted by Blacky via PM
FlashScan V2 will in future be supported by software V8.
So if you have FlashScan V1, you will still be able to do BBL and to flash in a different OS or COS.
Last edited by joecar; August 27th, 2009 at 04:04 AM.
V1 cartainly can do BBL (i.e. it can log without a laptop connected)...
Follow these steps:
- using PC/laptop program the pids you want to log,
- remove V1 from PC/laptop and take V1 to car,
- log from car (while PC/laptop stays home),
- remove V1 from car and take it to your PC/laptop,
- upload the saved log(s) and view in scantool.
From the V7 scantool see these menu commands:
FlashScan->Program Selected PIDs Into FlashScan
FlashScan->Read Logged Data From FlashScan
In those 2 commands, "FlashScan" refers to FlashScan V1.
V1 BBL:
- single pid list (you program this in while connected to laptop).
- 23 minutes worth of log (in Fast 10 mode).
V2 BBL:
- multiple pid lists (you select which pid list you want to log).
- number/length of logs limited only by SD card size.
- able to read OBD-II diagnostics information (DTCs, modes 2,3,4,5,6,7,9).
Still no NOS stuff for the 1mb PCM guys? eg 04140005
Jez