Page 34 of 36 FirstFirst ... 243233343536 LastLast
Results 331 to 340 of 355

Thread: Custom OS#5

  1. #331
    Lifetime Member Tre-Cool's Avatar
    Join Date
    Feb 2006
    Posts
    936

    Default

    whats the chances of being able to edit or allow support for up to 25 degrees of timing to be removed in the A0010 table? with the use of ethanol now, my normal timing map is is above 20 degrees under boost and i want to allow for a whole lot of timing removal if it looses a boost reference to the wastegates etc.

    is it just an efilive limit for the table or ecu/tune limit?

  2. #332
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by joecar View Post
    Updated COS5.txt notes.
    Bump to the end of the thread, and minor edit.
    Attached Files Attached Files
    Last edited by joecar; April 15th, 2017 at 06:15 AM.

  3. #333
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,892

    Default

    Anyone know about Black02ss? 10 years since his last post.
    "All that is needed for the triumph of evil is that good men do nothing..."

  4. #334
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Pretty sure he left the whole scene a long time ago, I think he sold his car and moved on.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #335
    Lifetime Member BowlingSS's Avatar
    Join Date
    Nov 2003
    Posts
    607

    Default

    Quote Originally Posted by GMPX View Post
    Pretty sure he left the whole scene a long time ago, I think he sold his car and moved on.
    That is too bad he left. I am not on very often either but I am still here.

    Bill
    Last edited by BowlingSS; April 28th, 2020 at 12:31 AM.
    2011 Camaro 2SS/RS L99 RJT
    CAI, Inc. Cold Air Induction;ADM Scoop
    Rx Catch Can;Rx Breather;Roto-Fab Washer Container
    VMax Ported RJT Throttle Body
    XSPower Headers and XSPower 3" Exhaust System
    Elite Engineering Tunnel Brace,
    Gorilla Wheel Lock System;
    Tinted Windows 35%;EFILive Tune

  6. #336
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yeah, too bad.

  7. #337
    Lifetime Member
    Join Date
    May 2007
    Posts
    365

    Default

    Quote Originally Posted by joecar View Post
    Yeah, too bad.
    I have recently started looking back into the tps ve table. when I open the map for it in scan tool, it is missing a pid. what all pids are needed to log tps ve?
    2000 NBM trans am.
    427 Dart ship block,Lme ported Ls7 heads 12.5 compression
    246/262 .730/.712 112+4 low lash solid roller
    Rmvb 4l80 with transbrake, 8" FTI converter
    12 bolt Moser rear end with 4.10 gears

  8. #338
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which pid are you missing...?

  9. #339
    Lifetime Member
    Join Date
    May 2007
    Posts
    365

    Default

    Quote Originally Posted by joecar View Post
    Which pid are you missing...?
    Honestly not sure. I have Volumetric Efficiency selected , what else is needed for that and how do I tell what is missing for each map?
    2000 NBM trans am.
    427 Dart ship block,Lme ported Ls7 heads 12.5 compression
    246/262 .730/.712 112+4 low lash solid roller
    Rmvb 4l80 with transbrake, 8" FTI converter
    12 bolt Moser rear end with 4.10 gears

  10. #340
    Lifetime Member 5.7ute's Avatar
    Join Date
    Oct 2006
    Posts
    1,840

    Default

    Quote Originally Posted by Aint Skeered View Post
    Honestly not sure. I have Volumetric Efficiency selected , what else is needed for that and how do I tell what is missing for each map?
    T.P.S VE requires the Throttle Position and RPM pids to be selected as these are what is referenced on the Axis of the table. Also the VE table look up value pid is required to initially populate the table.
    From there you can start using BEN values to dial the table in once activated.
    The Tremor at AIR

Page 34 of 36 FirstFirst ... 243233343536 LastLast

Similar Threads

  1. Two PCM's with same Custom OS HELP
    By superspeed in forum Gen III V8 Specific
    Replies: 6
    Last Post: February 1st, 2009, 01:45 PM
  2. custom OS with efi v1
    By dsmlights in forum Custom Operating Systems
    Replies: 4
    Last Post: December 5th, 2007, 06:28 PM
  3. Why LM-1 Custom PID???????
    By 2002_z28_six_speed in forum General
    Replies: 3
    Last Post: June 3rd, 2007, 11:52 PM
  4. Custom Os???
    By FFP in forum Custom Operating Systems
    Replies: 1
    Last Post: December 7th, 2006, 12:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •