Hey Wade,
Serial wideband: do you have this connected to V2 (using null modem adapter or wiring modified to do so)...?
Is your V2 able to read the AFR, Lambda and EQR from the wideband...?
Log these pids (in addition to the other AutoVE pids):
- GM.EQIVRATIO
- EXT.WO2LAM1
could also log these:
- EXT.WO2EQR1
- EXT.WO2AFR1 (depends on stoich AFR assumed by wideband)
- EXT.WO2ST1
make sure the pid channel count (shown at bottom of PIDs tab and Data tab) is 24 or less...
( EXT.xxx pids occupy zero pid channels )
if you have pid channels left (before hitting 24), you may want to log GM.AFR, but I think it's better to avoid it and use GM.EQIVRATIO instead;
if you don't already have one, you will need a BEN pid defined as "{GM.EQIVRATIO}*{EXT.WO2LAM1}"... this is already defined in the calc_pids.txt file of the Calc.VET thread (see post #1).