Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: lean at wot snap in gear

  1. #11
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    So you made sure a MAF DTC was showing up, you added air to the VE table to handle the throttle snap, and same thing happens...?


    If you suspect injectors are maxing out, log GM.IBPW1/2 and CALC.INJDC1/2, let's see what the DC% is.

  2. #12
    Junior Member
    Join Date
    Dec 2013
    Posts
    21

    Default

    sorry for the late reply, the issue was a restricted fuel line. Repaired that and the tune came in near perfect.

    Thanks for the help!

Page 2 of 2 FirstFirst 12

Similar Threads

  1. 5.3 swap going lean during wot/pe
    By Dannn in forum Gen III V8 Specific
    Replies: 2
    Last Post: July 15th, 2014, 11:54 AM
  2. NB O2's & Lean WOT
    By RevGTO in forum Gen III V8 Specific
    Replies: 4
    Last Post: December 19th, 2012, 05:16 PM
  3. Real lean at WOT or WB ?
    By maudyZ28 in forum Gen III V8 Specific
    Replies: 2
    Last Post: September 10th, 2012, 08:30 AM
  4. How do you take a Snap shot of the screen
    By scottcmb in forum General
    Replies: 7
    Last Post: April 8th, 2012, 08:54 AM
  5. How to correct WOT for each gear?
    By PRAY in forum Gen III V8 Specific
    Replies: 5
    Last Post: June 9th, 2008, 09:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •