Results 1 to 10 of 12

Thread: lean at wot snap in gear

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Dec 2013
    Posts
    21

    Default lean at wot snap in gear

    This is a 5.3 with a asa 525 cam. the issue is a constant lean condition under a wot snap from idle. I have added up to 30% more fuel in the v.e. table and it has had no effect. this a s.d.tune. if you take off easy and have the rpm's around 2500 then go wot it will perform great. spraying it with carb spray during the hesitation will make it run correctly. fuel pressure is 58psi during lean condition. any thoughts??
    Attached Files Attached Files
    Last edited by mecnic99; October 19th, 2015 at 04:48 AM.

Similar Threads

  1. 5.3 swap going lean during wot/pe
    By Dannn in forum Gen III V8 Specific
    Replies: 2
    Last Post: July 15th, 2014, 11:54 AM
  2. NB O2's & Lean WOT
    By RevGTO in forum Gen III V8 Specific
    Replies: 4
    Last Post: December 19th, 2012, 05:16 PM
  3. Real lean at WOT or WB ?
    By maudyZ28 in forum Gen III V8 Specific
    Replies: 2
    Last Post: September 10th, 2012, 08:30 AM
  4. How do you take a Snap shot of the screen
    By scottcmb in forum General
    Replies: 7
    Last Post: April 8th, 2012, 08:54 AM
  5. How to correct WOT for each gear?
    By PRAY in forum Gen III V8 Specific
    Replies: 5
    Last Post: June 9th, 2008, 09:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •