He told me he did upload an OS that gave him twice the table size to manipulate.

I guess I'm just stuck with monitoring from my EFILive right now, since going with the two-bar and SD is my best solution right now.
While tuning, we troubleshot fuel pressure dropping off at a little over 5000 RPM and discovered one of my pumps is only making 25 PSI, so it is failing.

(At little over 5000 RPM as fuel was dropping off, it made 551 RWHP/531 RWTQ).

He is going to replace that pump today and finish the tune and dyno. I'm anxious to see what it finally does.