Page 11 of 12 FirstFirst ... 9101112 LastLast
Results 101 to 110 of 114

Thread: Read HPTuners Tune with EFILive. 2 Bar

  1. #101
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Comments on 20151126aSDAutoVE.ctz:

    A0001, A0002: set these to 100%.
    A0012, A0013: set these to 511 mph (i.e. max-1).

    B3613: set this to 105 kPa.
    B3647: set upper 3 columns to EQR 1.185.
    B3618: set this to EQR 1.265.
    B3616: set 3200, 3600, 4000 to 34%.

    B3603, B3659: set these to EQR 1.265.

    B4105: set all cells to 450 mV.

    B5913, B5914: these may have too much advance in the high load columns, possibly need to subtract 6 degrees.

  2. #102
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    You have a 4L60E with a 2.84/1.57 gearset...?

  3. #103
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    VSS vs TP shift tables are not suited to street/daily driver.

    D0701, D0702, D0703: can increase pressure, say +10%.

  4. #104
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    274

    Default

    Quote Originally Posted by joecar View Post
    You have a 4L60E with a 2.84/1.57 gearset...?

    Yes... 6-pinion planetary. I'll never go back.
    I'd rather be blown, bored... AND stroked!
    Now: 447 CID (Corvette 427) , ATI Procharger D-1SC Supercharger

  5. #105
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by Black LS1 T/A View Post
    Yes... 6-pinion planetary. I'll never go back.
    Yeah, I like that gearset, makes the 4L60E ratios closer, allows you to use less stall.

  6. #106
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Also: keep your wideband-to-V2 analog connection, and see if you can get the serial comms connection going also.

  7. #107
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    274

    Default

    Quote Originally Posted by joecar View Post
    ...
    A0012, A0013: set these to 511 mph (i.e. max-1).
    Mine said max of 824, so I set it to 823 (-1) if you still intend I set it to 511, let me know..

    Quote Originally Posted by joecar View Post
    B3647: set upper 3 columns to EQR 1.185.
    Do you mean "upper three rows"?

    Quote Originally Posted by joecar View Post
    B5913, B5914: these may have too much advance in the high load columns, possibly need to subtract 6 degrees.
    How many columns are you calling "High load"? Which ones?
    I'd rather be blown, bored... AND stroked!
    Now: 447 CID (Corvette 427) , ATI Procharger D-1SC Supercharger

  8. #108
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    274

    Default

    For now, I set 1.20 coum to 12, and added 1 degree per column until it matched what I already have (at column .96/1.00)
    I'd rather be blown, bored... AND stroked!
    Now: 447 CID (Corvette 427) , ATI Procharger D-1SC Supercharger

  9. #109
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    274

    Default

    It cut off if decreased below 1500 RPMS. I waited until it warmed up, and when I manage to baby the throttle downt o 900, it would stay there. But, if I increased throttle back up to 1500, it stalled out and cut off.
    Adjusted wrong table. RE-flashed. After warming about 3 or 4 minutes (weather in the upper 50's right now) it wouldn't idle off throttle. But I will drive out with that tune and see what happens rolling. I'll post result at work.
    Last edited by Black LS1 T/A; November 27th, 2015 at 02:00 AM.
    I'd rather be blown, bored... AND stroked!
    Now: 447 CID (Corvette 427) , ATI Procharger D-1SC Supercharger

  10. #110
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    274

    Default

    Also, keep in mind I'm in AutoVE Tune mode right now ... Forced Octane Scaler was turned off and things like TOS VE Table are disabled as well.
    I'd rather be blown, bored... AND stroked!
    Now: 447 CID (Corvette 427) , ATI Procharger D-1SC Supercharger

Page 11 of 12 FirstFirst ... 9101112 LastLast

Similar Threads

  1. efilive or hptuners?
    By dian in forum Gen III V8 Specific
    Replies: 43
    Last Post: December 10th, 2014, 01:25 AM
  2. Replies: 8
    Last Post: June 10th, 2013, 06:57 PM
  3. efilive v2 vs hptuners
    By mellor in forum FlashScan V2
    Replies: 48
    Last Post: November 8th, 2010, 08:46 AM
  4. I somebody emails me a HPTUNERS file, can I load it into a car with my EFILIVE??
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: March 24th, 2010, 11:01 AM
  5. Flashscan vs HPTuners? Upgrade from EFILive
    By Iv_z28 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: December 12th, 2004, 10:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •