Results 1 to 10 of 10

Thread: Brake Torque Management

  1. #1
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    225

    Default Brake Torque Management

    E38 12607218 OS T42 Auto

    Is it able to be disabled in EFI-Live?

    If so where do I look other than B2523?

    Thanks guys..

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Not sure what vehicle you have but turning off the TCS will also disable the BTM system anyway.
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    225

    Default

    It's an Autocross car with VZ Commodore Electricals and electronics, TRAC is off but it's still doing the BTM thing.. thanks for the reply.

  4. #4
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Ah ok, it is probably defaulting to staying on. I think (someone might dispute this) if you are using a Ute tune then this is what happens, on the sedan tune it is ok.
    I no longer monitor the forum, please either post your question or create a support ticket.

  5. #5
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    225

    Default

    99% sure it's a Sedan tune, I'll check..

  6. #6
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    225

    Default

    Quote Originally Posted by GMPX View Post
    Ah ok, it is probably defaulting to staying on. I think (someone might dispute this) if you are using a Ute tune then this is what happens, on the sedan tune it is ok.
    And that .1% bit me in the arse... it's been flashed as a Cab Chassis... :(

    Can I use a Sedan VIN/File if I can find one and will it need to be licenced again?

  7. #7
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by IJ. View Post

    Can I use a Sedan VIN/File if I can find one and will it need to be licenced again?
    ECM is already licensed (license attaches to ECM's serial number).

  8. #8
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    225

    Default

    Quote Originally Posted by joecar View Post
    ECM is already licensed (license attaches to ECM's serial number).
    Thanks Joe!

  9. #9
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Just find a sedan version with the same OS, turn off what you need for the conversion and I think you'll be fine.
    I no longer monitor the forum, please either post your question or create a support ticket.

  10. #10
    Lifetime Member
    Join Date
    Feb 2013
    Posts
    225

    Default

    Quote Originally Posted by GMPX View Post
    Just find a sedan version with the same OS, turn off what you need for the conversion and I think you'll be fine.
    Thanks for the help!

    Just in case anyone here is interested this is the car>>

    Last edited by IJ.; October 27th, 2015 at 07:34 PM.

Similar Threads

  1. Replies: 5
    Last Post: February 11th, 2014, 01:53 PM
  2. Where is the Brake Torque Management Button B9905 at??
    By mega2006 in forum Cummins 5.9L
    Replies: 8
    Last Post: December 11th, 2012, 11:21 AM
  3. Brake Torque Management Screen Shots Needed
    By LeftCoast32 in forum Gen IV V8 Specific
    Replies: 32
    Last Post: September 5th, 2011, 02:11 AM
  4. B0401/0402 Brake Torque Management (BTM)
    By TurboCamaro in forum Gen III V8 Specific
    Replies: 6
    Last Post: September 30th, 2010, 07:55 AM
  5. Brake Torque Management?
    By trudynosports in forum Gen IV V8 Specific
    Replies: 10
    Last Post: February 28th, 2007, 09:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •