So, I have 2 serial Widebands and 3 AD inputs. When I plug in the sensors for AD ports, and click record, logging won't start. As soon as I remove
the AD connection, the log starts. Anyone had this problem?
So, I have 2 serial Widebands and 3 AD inputs. When I plug in the sensors for AD ports, and click record, logging won't start. As soon as I remove
the AD connection, the log starts. Anyone had this problem?
07 Silverado DMax Classic
02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
Old Engine: 1/4mile = 9.6/146 New Engine:?
EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2
COS5/12212156 For 2002 Z06 Manual Vette
Which V2 firmware version...?
( which V8 build version...? )
Are you logging with V7 or V8...?
What is the voltage range of each of the devices you have connected to the AD inputs...?
Firmware 2.07.91 V7 Build 293. and 0 to 5v.
07 Silverado DMax Classic
02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
Old Engine: 1/4mile = 9.6/146 New Engine:?
EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2
COS5/12212156 For 2002 Z06 Manual Vette
This update fixes that problem:
https://forum.efilive.com/showthread...ic-Pre-Release
This is the comment about it in the "what's new" doc:
Fixed “Negative Response Error/5” when starting a pass-thru data log while AD1 is connected to a voltage signal of 1.2V or more.
If you need to log the AD inputs before you have a chance to update, you can start logging, pause the log, then connect the AD voltages, then continue logging.
Regards
Paul
Before asking for help, please read this.
Downloaded. Thanks.
07 Silverado DMax Classic
02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
Old Engine: 1/4mile = 9.6/146 New Engine:?
EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2
COS5/12212156 For 2002 Z06 Manual Vette