Results 1 to 6 of 6

Thread: V2 Issue w/AD Ports

  1. #1
    Lifetime Member
    Join Date
    Jul 2007
    Posts
    376

    Default V2 Issue w/AD Ports

    So, I have 2 serial Widebands and 3 AD inputs. When I plug in the sensors for AD ports, and click record, logging won't start. As soon as I remove
    the AD connection, the log starts. Anyone had this problem?
    07 Silverado DMax Classic
    02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
    Old Engine: 1/4mile = 9.6/146 New Engine:?

    EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2


    COS5/12212156 For 2002 Z06 Manual Vette

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which V2 firmware version...?

    ( which V8 build version...? )

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Are you logging with V7 or V8...?

    What is the voltage range of each of the devices you have connected to the AD inputs...?

  4. #4
    Lifetime Member
    Join Date
    Jul 2007
    Posts
    376

    Default

    Firmware 2.07.91 V7 Build 293. and 0 to 5v.
    07 Silverado DMax Classic
    02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
    Old Engine: 1/4mile = 9.6/146 New Engine:?

    EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2


    COS5/12212156 For 2002 Z06 Manual Vette

  5. #5
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    This update fixes that problem:
    https://forum.efilive.com/showthread...ic-Pre-Release

    This is the comment about it in the "what's new" doc:
    Fixed “Negative Response Error/5” when starting a pass-thru data log while AD1 is connected to a voltage signal of 1.2V or more.

    If you need to log the AD inputs before you have a chance to update, you can start logging, pause the log, then connect the AD voltages, then continue logging.

    Regards
    Paul
    Before asking for help, please read this.

  6. #6
    Lifetime Member
    Join Date
    Jul 2007
    Posts
    376

    Default

    Downloaded. Thanks.
    07 Silverado DMax Classic
    02 Z06 LS3 416, 805rwhp, TFS245, Wiseco, Callies Crank/Rods, Iskendarian Lifters, Crower Rockers, FAST102/90, ATI Damper, 1-7/8 Kook's LT, QkTime Shield,Tolle-Fab 8pt
    Old Engine: 1/4mile = 9.6/146 New Engine:?

    EFI Live Tune/Scan v7.5.27, EFI Live Scan and Tune v8.2.23, build 276, BootBlock 2.07.06, FirmWare 2.07.52, 512K RoadRunner (12.14.R), Innovate Serial LC2x2


    COS5/12212156 For 2002 Z06 Manual Vette

Similar Threads

  1. Wierd issue after flash, airbag light on & oil reset issue
    By Tool Guy in forum Gen III V8 Specific
    Replies: 4
    Last Post: October 1st, 2013, 05:55 PM
  2. Replies: 21
    Last Post: July 7th, 2013, 10:31 AM
  3. No ports displayed in the device manager
    By Trippin in forum RoadRunner Real-Time PCM Emulator
    Replies: 3
    Last Post: December 9th, 2008, 06:35 AM
  4. issue with 7.4
    By mr.prick in forum General (Petrol, Gas, Ethanol)
    Replies: 39
    Last Post: July 10th, 2008, 03:51 PM
  5. 2 OBDII Ports???
    By kbracing96 in forum General
    Replies: 8
    Last Post: August 31st, 2006, 04:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •