Results 1 to 1 of 1

Thread: 2004 AL5 May Be Corruped

  1. #1
    Senior Member
    Join Date
    Feb 2012
    Posts
    135

    Default 2004 AL5 May Be Corruped

    Trying to help a friend with a few problems with an 04 LB7 and AL5. The truck is hitting a limiter or limp mode during acceleration. I've tried to read the controllers details with V8 using F4, and would get an error saying something out of range (if forgot to take a screen shot) that is trying to read the ECM and TCM. Now when using V7.5 tune tool I can get info from the TCM and ECM, but I think the TCM may be corrupted, see pic. I was able to get a data read of both TCM (which took 40 or so min) and ECM using V8, maps all seem normal. Only thing is the TCM has no vin. Truck also shows some crazy high injector balance rates, but runs very smooth at idle and going down the road (no smoke). The truck has new GM injectors (few months old), and CP3. I was told truck ran great besides a leaking head gasket, they fixed the heads and studded it, and now it runs bad. I'm thinking it may be a wiring problem, just wanted to see what you guys think. The truck at the moment does not have any major DTC's just a Dash, and ABS wheel code. I have logs attached.

    Click image for larger version. 

Name:	20151104_195059.jpg 
Views:	62 
Size:	694.6 KB 
ID:	18987

    Log_0000.efi
    Log_0001.efi
    Log_0002.efi



    Thanks

    Sam
    Last edited by 30 RUM; November 6th, 2015 at 02:04 AM.

Similar Threads

  1. Replies: 5
    Last Post: January 15th, 2015, 05:49 AM
  2. Al5 Pics
    By Chavez91 in forum Allison 5 & 6 Speed
    Replies: 2
    Last Post: October 29th, 2014, 10:01 AM
  3. ATTENTION AL5 SWAPPERS! What PID are you using for Speed?
    By beav in forum Allison 5 & 6 Speed
    Replies: 4
    Last Post: December 8th, 2013, 01:02 PM
  4. 2004 4L60E ????'s
    By GAMEOVER in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 8
    Last Post: May 26th, 2010, 06:23 PM
  5. 2004 trailblazer
    By driver456 in forum Gen III V8 Specific
    Replies: 4
    Last Post: October 21st, 2009, 10:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •