Hi All

I've been trying to get my Custom Dashboards to work correctly without any luck. I have 4 PID's enabled on my V2.
I'm currently running Firmware: 2.07.82 on the V2 and V7.5.7 (Build 282) and V8.2.2 (Build 276)

1: LS1 AUTO MAF
2: LS1 AUTO MAFLESS
3: LS1 MANU MAFLESS
4: LS1 MANU MAF


MY PID FILE OUTPUT:
;Caption Active Modules (Engine&Trans) Hot Key Dashboard
;----------------- ------ -------------------------- -------- --------------------------
LS1 AUTO|MAF, Y, LS1B_M, , "LS1 AUTO MAF LTFT.vdb"
LS1 AUTO|MAFLESS, Y, LS1B_M, , "LS1 AUTO MAFLESS LTFT.vdb"
LS1 MANU|MAFLESS, Y, LS1B_M, , "LS1 MANU MAFLESS LTFT.vdb"
LS1 MANU|MAF, Y, LS1B_M, , "LS1 MANU MAF LTFT.vdb"

When I manually open my custom dashboards, they work perfectly. I'm pretty sure I have figured it out, for some reason the scan files are not having the correct "DASHBOARD=" value set as shown below.

COUNT=0
[DATA],6
DASHBOARD=
PIDCOUNT=19
CHANNELCOUNT=26
FRAMECOUNT=00000374
STARTDATE=2457334

Any idea's on what I can do to fix this? I have tried to uninstall and reinstall V8 and V7.5 with no luck.

I've been working with swingtan and he suggested I post in the forum.


Thank you for your help.