E38 IVT table required

[Tre-Cool]

Yep, got the cax file and it works. I loaded up a tune for that os and loaded up the modified one I did with hpt and it read the correct values. (3.96 instead of 7.92)

This will come in real handy when I setup flex fuel for my brothers car which will be running 100lb injectors.

[TrendSetter]

can you share the file for others to leverage?
i just bought credits to tune a 08 vette and now it looks like i need to use HPT because they have the ivt table for proper injector scaling.

its unfortunate i had to buy hpt because they have supported newer gm gas vehicles so much better than efilive even though efilive has the superior platform.

[Tre-Cool]

this is for 7.5, you will need to save into new file and put in the required folder location.
OS-12617631

[TU0049]
; Description
; ---------------------------------------------------------------------------------------------------------------------------------
DESC.001 = IVT Weighting Coefficient - AFR Term.
DESC.002 =
DESC.003 = Referenced to the Ethanol % of the gasoline being used.
DESC.004 =
DESC.005 =
;
;
; Seg Caption Major Minor Vis Dis 2D Grp
; --- --------------------------------------- --------------------------- ---------------- --- --- -- ---
VIEW = 2 "IVT Weighting Coefficient - AFR Term" "Fuel" "General" 2 2 0 0
;
; Address(es) BitOff Bits Typ Inv
; -------------------------------- ------ ---- --- ---
ADDR = 1E5E9C 0 16 UNM 0
;
; Units Factor Offset Prec MinLimit MaxLimit MinUser MaxUser
; ------------------------ -------------- ------ ---- -------- -------- -------- --------
SI_SLOT = Factor 0.003906309 0 2 -128 128 -128 128
IM_SLOT = Factor 0.003906309 0 2 -128 128 -128 128
;
; Body Col Row
; -------------- -------------- --------------
ULABELS = . . .
;
; Enumerations
; -------------------------------------------------------------------
SI_ENUM = .
IM_ENUM = .
;
; Units Labels
; ---------------- -----------------------------------------------------
SI_COL = Factor """AFR Term"""
IM_COL = Factor """AFR Term"""
;
SI_ROW = Ethanol% "0,10,20,50,80"
IM_ROW = Ethanol% "0,10,20,50,80"
;================================================= ================================================== =========================================

[TrendSetter]

that worked, thank you so much