Power enrichment mode explained...Please:)

[TLKSCHP]

Ok I just looked at Freemans tune and it is in Lambda. So if it has a value of .9 and I want to richen it up I would make it .8?. Just when I thought I knew what to try

[Doc]

Yes, by changing the value from .9 to .8 you will be adding fuel. Like I said before though, try changing the units displayed and use whatever works for you.

[joecar]

Ok I just looked at Freemans tune and it is in Lambda. So if it has a value of .9 and I want to richen it up I would make it .8?. Just when I thought I knew what to try

Yes, if it's in lambda, then 0.8 is richer than 0.9;

(the little voice in back of head was telling me something about bad assumptions... )

As Doc said, in your tune tool, go Edit->Properties and change the "Commanded Fuel Values->Display In" to either AFR or EQ;

lambda will twist your mind unless you're a mental giant.

[black z]

What is the default setting for EFILive? AFR?

[joecar]

What is the default setting for EFILive? AFR?

I think the EFILive default is EQ, and the PCM uses EQ.