Help setting up wide band to log.

[LSXRacer]

Hi All, I'm trying to set up my v2 to log ngk afr . I can't find any type of tutorial that shows how to set up a custom ad input. I also need to find out how to make histograms to log ve-afr error. Please help or help me load the bullets I'm getting frustrated. thanks.

[joecar]

Install V7 and V8 from here: Novemeber-2015-EFILive-Public-Stable-Release

and then update the V2 firmware.

[joecar]

PLX's analog output:
- connect PLX analog signal and ground to FSV2 AD1+ and AD1- respectively;
- in V7 scantool select pid EXT.AD1 and CALC.AFR_PLX1 to log.

PLX serial comms output (if you have it wire up for this):
- connect PLX serial comms in null modem style (Rx/Tx crossed) to FSV2 RJ12 jack;
- in V7 scantool select pids EXT.WO2LAM1, EXT.WO2AFR1, EXT.WO2EQR1, EXT.WO2ST1 to log.

[joecar]

To see how to make maps ("histograms") see the V7 user manual pdf...

and also read post #1 of this thread (it shows how to make maps): Calc.VET

[joecar]

Sorry, I meant: see post #1 of this thread: CALC-VET-Summary-Notes

[LSXRacer]

I'm using the NGK which is analog. I'm able to read afr now. the other pids you said to monitor do not show up in the analog section. From here how do i set up those remaining pids? How do I create histograms to log ve-afr error? I do have the latest software and firmware updates installed. thanks.

[joecar]

Basically:

goto (say) VE table B0101, and rightclick in upper left corner and do copy-with-labels...

then goto scantool map, and in the map's properties, on each of Row and Col tabs click Paste Labels.

[LSXRacer]

Ok, I'll read up on this tonight and let you know how i make out. thanks.

[joecar]

I'm using the NGK which is analog. I'm able to read afr now. the other pids you said to monitor do not show up in the analog section. From here how do i set up those remaining pids? How do I create histograms to log ve-afr error? I do have the latest software and firmware updates installed. thanks.

Sorry, I was looking at someone else's PLX questions...

yes, hook up same as I said for PLX analog above, but the pid would be CALC.AFR_NGK1.

[joecar]

I'm using the NGK which is analog. I'm able to read afr now. the other pids you said to monitor do not show up in the analog section. From here how do i set up those remaining pids?

Post a screenshot of the scantool Data tab.

How do I create histograms to log ve-afr error? I do have the latest software and firmware updates installed. thanks.

See this:

2. Creating Maps
http://download.efilive.com/Tutorials/Interactive/How to Create a Map.htm
Please also do this: on each of the Data, Row, Col tabs checkmark Show Units.