Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38

Thread: Setting up Serial WB to work with Auto VE tutorial.

  1. #1
    Senior Member
    Join Date
    May 2015
    Posts
    167

    Default Setting up Serial WB to work with Auto VE tutorial.

    I am following the Auto VE tutorial but have come to a wall as the pids selection is based on using a Analogue wideband. I have a AEM that supports serial and am after the pids i require to use the AutoVE tuning method (mafless) via serial WB rather then analogue.

    Thanks Julian.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Hi Julian,

    For the BEN pid use the pid CALC.WO2BEN from the Calc.VET thread, see post #1: Calc-VET

    i.e. copy this file: calc_pids.txt to this folder: Documents\EFILive\V7.5\User Configuration

    when you next open the scantool, you will see the pid CALC.WO2BEN, it uses GM.EQIVRATIO and EXT.WO2LAM1.

  3. #3
    Senior Member
    Join Date
    May 2015
    Posts
    167

    Default

    Joe,

    I have attached a photo of my selected PID's and my BEN Map. can you please check if i have everything right before i go ahead and start with my Auto VE tune.

    Thanks Julian.

    Click image for larger version. 

Name:	PIDs.jpg 
Views:	194 
Size:	165.8 KB 
ID:	19079Click image for larger version. 

Name:	BEN Map.jpg 
Views:	169 
Size:	137.3 KB 
ID:	19080
    Last edited by jmsmotorsport; December 8th, 2015 at 10:24 PM.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Yes, looks right.

  5. #5
    Senior Member
    Join Date
    May 2015
    Posts
    167

    Default

    Thanks joe. Your help is always appreciated.

  6. #6
    Senior Member
    Join Date
    May 2015
    Posts
    167

    Default

    Joe,

    Having a strange problem while trying to do the AutoVE tune, I can drive around fine but when i go to do some higher rpm stuff the car goes into limp mode. I have attached a log and a copy of the DTC's that came up. The oil pressure one is always there.

    Thanks Julian.

    Click image for larger version. 

Name:	DTC's.jpg 
Views:	129 
Size:	110.3 KB 
ID:	19096

  7. #7
    Senior Member
    Join Date
    May 2015
    Posts
    167

  8. #8
    Senior Member
    Join Date
    May 2015
    Posts
    167

    Default

    Here is the tune file also. ChoccoMafless2-B3605 full edit.ctz

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Quote Originally Posted by jmsmotorsport View Post
    Here is the tune file also. ChoccoMafless2-B3605 full edit.ctz
    You want EQR to be around 1.165 at high engine load.

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    P0068 indicates that MAP has exceeded sanity envelope...

    need to adjust the MAP sanity tables in the Engine Diagnostics segment of the tune.

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Tutorial: FlashScan V2 Serial Wideband Logging
    By TAQuickness in forum Tutorials
    Replies: 30
    Last Post: July 22nd, 2015, 09:47 AM
  2. Replies: 6
    Last Post: April 21st, 2015, 03:13 PM
  3. Newb Setting up serial Wide band
    By HellKnightHicks in forum General
    Replies: 25
    Last Post: January 16th, 2013, 11:30 AM
  4. Auto VE With a Serial AFR
    By Behold in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: April 11th, 2011, 04:34 AM
  5. Setting up auto ve with serial input ???
    By Slowrc in forum Gen III V8 Specific
    Replies: 22
    Last Post: February 12th, 2010, 04:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •